Current and ultimate limitations of scanning x-ray nanotomography
نویسنده
چکیده
X-ray nanotomography has developed into a powerful new tool for three-dimensional structural analysis. The scanning approach offers capabilities that are competitive with full-field imaging. Current and ultimate limitations of nanotomography are examined in light of recent work.
منابع مشابه
Focused ion beam preparation of samples for X-ray nanotomography.
The preparation of hard material samples with the necessary size and shape is critical to successful material analysis. X-ray nanotomography requires that samples are sufficiently thin for X-rays to pass through the sample during rotation for tomography. One method for producing samples that fit the criteria for X-ray nanotomography is focused ion beam/scanning electron microscopy (FIB/SEM) whi...
متن کاملA hard x-ray nanoprobe for scanning and projection nanotomography.
To fabricate and qualify nanodevices, characterization tools must be developed to provide a large panel of information over spatial scales spanning from the millimeter down to the nanometer. Synchrotron x-ray-based tomography techniques are getting increasing interest since they can provide fully three-dimensional (3D) images of morphology, elemental distribution, and crystallinity of a sample....
متن کامل3D X-Ray Nanotomography of Cells Grown on Electrospun Scaffolds.
Here, it is demonstrated that X-ray nanotomography with Zernike phase contrast can be used for 3D imaging of cells grown on electrospun polymer scaffolds. The scaffold fibers and cells are simultaneously imaged, enabling the influence of scaffold architecture on cell location and morphology to be studied. The high resolution enables subcellular details to be revealed. The X-ray imaging conditio...
متن کاملInvestigating the Effect of Current Type (Direct and Pulsed) on Microstructure and Mechanical Properties of Hastelloy B-2 Superalloy Welded Joint by GTAW Process
In this research, Gas tungsten arc welding (GTAW) on Hastelloy B-2 Superalloy was used to investigate the effect of current type on microstructure and mechanical properties of welded zone. The welding process was performed using two direct and pulsed current and with Hastelloy X filler metal. Optical Microscope (OM) and Scanning Electron Microscope (SEM) were used to investigate the microstruct...
متن کاملMorphological and topological analysis of coarsened nanoporous gold by x-ray nanotomography
by x-ray nanotomography Yu-chen Karen Chen, Yong S. Chu, JaeMock Yi, Ian McNulty, Qun Shen, Peter W. Voorhees, and David C. Dunand Department of Materials Science and Engineering, Northwestern University, Evanston, Illinois 60208, USA Advanced Photon Source, Argonne National Laboratory, Argonne, Illinois 60439, USA National Synchrotron Light Source II, Brookhaven National Laboratory, Upton, New...
متن کامل