Rüzgâr Kaynakli Enerji̇ Üreti̇m Si̇stemleri̇nde Çevresel Etki̇leri̇n Değerlendi̇ri̇lmesi̇ Ve Çözüm Öneri̇leri̇

نویسندگان

  • Kâmil B. VARINCA
  • Gamze VARANK
چکیده

Energy is the fundamental source for the human being to implement the current and oncoming all of the technological, industrial, communicational activities. In other words energy is an indispensable requirement fort he current modern information community and energy will continue to be one of the most important sources in the future. Energy requirement rises day by day; furthermore available sources are limited and consumable. Therefore it is essential to detect alternative energy sources and develop them. National and international juridical arrangements, created to protect living ambiance and permanence on the world and environmental impacts and problems born of energy generation, transmission and consumption points out the importance of environmental impacts in the source selection. Today it is essential to detect and develop continuous and renewable energy sources with a few or no environmental impacts, instead of conventional fossil fuel originated energy generation systems causing environmental pollution in a large quantity and global scale. In this paper; environmental impacts of wind sourced energy generation systems qualified as renewable energy sources like sun, sea-wave, geothermal and hydrogen energies are studied and recommendations for minimizing these negative impacts are given.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Evaluation of the Anti Hepatitis C Virus Seropositivity and Serum Transaminases in Our Hospitals Hastanemi̇z Anti̇ Hepati̇t C Vi̇rus Seropozi̇ti̇fli̇ği̇ni̇n Ve Serum Transami̇nazlarinin Değerlendi̇ri̇lmesi̇

DOI: 10.4328/JCAM.4955 Received: 18.02.2017 Accepted: 08.03.2017 Printed: 01.04.2017 J Clin Anal Med 2017;8(suppl 2): 105-8 Corresponding Author: Arzu İrvem, Mikrobiyoloji Bölümü, Ümraniye Eğitim ve Araştırma Hastanesi, Elmalıkent, 34764 Ümraniye, İstanbul, Türkiye. T.: +9

متن کامل

TAVŞAN TİBİALARINA UYGULANAN DENTAL İMPLANTLARIN BİYOMEKANİĞİNİN İNCELENMESİ YÖNTEMİNİN DEĞERLENDİRİLMESİ The Evaluation of the Method Used to Investigate the Biomechanics of Dental Implants Inserted in the Tibias of the Rabbits

Özet : Bu çalışmanın amacı, osteoporotik tavşanların tibialarına yerleştirilen titanyum implantların biyomekanik özelliklerini tarafımızdan geliştirilen bir ters tork manometre cihazı kullanarak incelemektir. Çalışmada kullanılan altı adet tavşan gelişigüzel olarak bilateral overektomi uygulanan (BO, n:2), bilateral overektomi uygulanan ve östrojen reseptör modülatörü olan raloksifen HCL verile...

متن کامل

Otomati̇k Nesne Tanimlama Ve Taki̇bi̇nde, Veri̇ Yöneti̇mi̇ Ve Anali̇z Si̇stemleri̇nde Rfid Üstünlükleri̇ the Advantages of Rfid on Object Identification and Tracking, Data Management and Analysis Systems

In today’s competition environment which is changing very fast, organizations need to renew their services, products and communication technics, change and replace their working methods with new ones continuously to benefit more from time and sources. Therefore, automatic object identification and tracking systems, data gathering, management and analysis technologies were always needed by compa...

متن کامل

On ev-degree and ve-degree topological indices

Recently two new degree concepts have been defined in graph theory: ev-degree and ve-degree. Also the evdegree and ve-degree Zagreb and Randić indices have been defined very recently as parallel of the classical definitions of Zagreb and Randić indices. It was shown that ev-degree and ve-degree topological indices can be used as possible tools in QSPR researches . In this paper we d...

متن کامل

Karişik Modelli̇ Üreti̇m Hatti Siralama Problemi̇ne Lagrange Gevşetme Yaklaşimi

In this study, a mixed model flow line sequencing problem with two objectives is considered. Mixed model flow line (MML) is known to be a special case of production lines where products are transported on a conveyor belt, and different models of the same product are inter-mixed to be assembled on the same line. We have focused on product-fixed, rate-synchronous lines with variable launching. Ou...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2005