Study on Performance and Dynamics of Inverter Controlled Rotary Compressors
نویسندگان
چکیده
An inverter controlled refrigeration system with a variable speed compressor is more efficient. In order to improve its efficiency and reliability in wide range of speed, a comprehensive simulation model for an inverter rotary compressor with single cylinder or dual cylinder is developed. The simulated results are compared with measured data. The variations of cooling capacity, input power, COP, various efficiencies and losses, and closing angle and impacting velocity of reed valve are analyzed. The pressure variations in working chambers at various speeds and their effects are explained. That the fluctuation of rotating speed of a single cylinder compressor operating at low speed produces the great difference between the practical and rated efficiency of motor is shown.
منابع مشابه
Dynamic Analysis of Roller and Vane of Inverter Controlled Rotary Compressors
This paper presents a complete dynamic analysis of roller and vane of a rotary compressor widely used for air-conditioners. An approach and a set of equations are developed estimating the type of motion at vane tip and roller interface and calculating the frictional force in accordance with the motion type. The forces on roller caused by relative motion between roller and cylinder wall are anal...
متن کاملSelection of Friction Materials Used in Compact, High Performance Inverter Controlled Rotary Compressors
T. IIZUKA and K. IKEDA Tochigi Works Hitachi, Ltd. Shimotsuga-gun, Tochigi-ken, Japan, 329-44 Since applications of rotary compressors driven by inverter motors have become more widespread, l~bricating problems with the sliding parts have been appearing. The sliding parts require sufficient antiseizure and wear-resistant properties under the boundary lubricating conditions. The authors have dev...
متن کاملLubrication Analysis of Rotary Compressors for HFC Refrigerants
In this study, a practical numerical analysis has been developed in order to investigate the lubrication characteristics between a rolling piston and a crank of rotary compressors. This analysis is treated as a coupled problem of the momentum equations and the Reynolds equation of oil film. Using this analysis, the lubrication characteristics between the rolling piston and the crank for 2-cylin...
متن کاملOperation Analysis of Rotary Tools of Compressor Station Using Exergy Approach
In this study, operation of compressor station has been investigated by exergy approach. Exergy analysis is a thermodynamic method which shows the irreversibility of a system quantitatively. Gas compressors are used to compensate the pressure drop along the gas pipeline significantly. The compression process causes temperature rise of gas; in this regard gas cooler is applied to reduce the temp...
متن کاملEvaluation of Composite Vane Materials for Rotary Sliding Vane Compressors
The physical performance characteristics of composite materials used for vanes in rotary, sliding-vane compressors, in general, are several orders of magnitude more difficult to quantify for design purposes than most homogeneous materials. This arises from the numerous variables that influence the response of these materials under the severe environmental conditions existing in such compressors...
متن کامل