High Efficiency DC-DC Converters for Battery- Operated Systems with Energy Management
نویسندگان
چکیده
Dc-dc converters suitable for use in battery-powered electronic equipment with energy management are discussed. To realize the benefits of energy management, these converters must be capable of maintaining regulation of their output voltages at no load, while maintaining high efficiency. Variable frequency operation is shown to give an improvement in efficient operating range of approximately two orders of magnitude. Proportionality of the battery and load currents can be maintained over approximately five orders of magnitude, with minimum battery currents of less than 100μA and maximum load currents approaching 10A. Steady-state and small-signal ac characteristics of converters operating with variable-frequency control are tabulated, and an ac two-port model is described.
منابع مشابه
Implementation of Optimal Load Balancing Strategy for Hybrid Energy Management System in DC/AC Microgrid with PV and Battery Storage
The proposed paper presents the DC/AC microgrid modeling using the Energy storage units and photovoltaic (PV) panels. The modal consists of a two stage power conversion. The power is supplied to the both DC and AC loads by this PV solar panels. The suitable way to explore the PV generation model is by using manufacturer datasheet. A bidirectional converter is connected to the battery storage sy...
متن کاملBattery life investigation of a hybrid energy management system considering battery temperature effect
This paper investigates the effect of temperature on a hybrid energy storage system with various energy management systems. The hybrid energy storage system consists of a fuel cell, ultracapacitor and battery with associated DC/DC and DC/AC converters. The energy management strategies employed are the state machine control strategy, fuzzy frequency/logic decoupling strategy, minimization strate...
متن کاملSystem-Level Requirements of DC-DC Converters for Dynamic Power Supplies of Power Amplifiers
The energy efficiency of battery-operated portable applications can be improved by increasing the efficiency of power amplifiers (PAs). By dynamically changing the supply voltage from the fixed battery supply using a DC-DC converter, the PA can be operated with high efficiency during power back-off. This paper presents the system level requirements for a buck converter and other blocks in a dyn...
متن کاملEnergy processing circuits for low-power applications
Portable electronics have fueled the rich emergence of new applications including multi-media handsets, ubiquitous smart sensors and actuators, and wearable or implantable biomedical devices. New ultra-low power circuit techniques are constantly being proposed to further improve the energy efficiency of electronic circuits. A critical part of these energy conscious systems are the energy proces...
متن کاملA Multi-port High Step-up DC/DC Converter for Hybrid Renewable Energy Application
This paper presents a novel multi-port DC/DC converter which is suitable to be used as the interface of hybrid renewable energy systems. The converter contains three unidirectional power flow ports which two of them are input ports and are connected to two independent energy sources while the third one is the output port that feeds a standalone load. Furthermore, the proposed converter contains...
متن کامل