An asymptotic model for the deformation of a transversely isotropic, transversely homogeneous biphasic cartilage layer
نویسندگان
چکیده
In the present paper, an asymptotic model is constructed for the short-time deformation of an articular cartilage layer modeled as transversely isotropic, transversely homogeneous (TITH) biphasic material. It is assumed that the layer thickness is relatively small compared with the characteristic size of the normal surface load applied to the upper surface of the cartilage layer, while the bottom surface is assumed to be firmly attached to a rigid impermeable substrate. In view of applications to articular contact problems it is assumed that the interstitial fluid is not allowed to escape through the articular surface.
منابع مشابه
Three-dimensional contact of TITH cartilage layers, a closed-form solution
Inhomogeneity and anisotropy play a crucial role in attributing articular cartilage its properties. The frictionless contact model constructed here consists in two thin biphasic transversely isotropic transversely homogeneous (TITH) cartilage layers firmly attached onto rigid substrates and shaped as elliptic paraboloids of different radii. Using asymptotic techniques, a solution to the deforma...
متن کاملA fiber-reinforced Transversely Isotropic Constitutive Model for Liver Tissue
Biomechanical properties of soft tissue, such as liver, are important in modeling computer aided surgical procedures. Experimental evidences show that liver tissue is transversely isotropic. In this article, considering the liver tissue as an incompressible fiber-reinforced composite with one family of fibers, an exponential strain energy function (SEF) is proposed. The proposed SEF is based on...
متن کاملContact analysis of biphasic transversely isotropic cartilage layers and correlations with tissue failure.
Failure of articular cartilage has been investigated experimentally and theoretically, but there is only partial agreement between observed failure and predicted regions of peak stresses. Since trauma and repetitive stress are implicated in the etiopathogenesis of osteoarthritis, it is important to develop cartilage models which correctly predict sites of high stresses. Cartilage is anisotropic...
متن کاملA Non-linear, Anisotropic, Inhomogeneous Model of Articular Cartilage
INTRODUCTION the deep layers because they are softer, a result that is Articular cartilage is a biological composite material made of consistent with experimental evidence [5]. a proteoglycan matrix, and of chondrocyte and collagen fibre inclusions. We have modelled articular cartilage by means of a Implementation of this model into a Finite Element code linearly elastic Transversely Isotropic,...
متن کاملAnalytical Solution for a Two-Layer Transversely Isotropic Half-Space Affected by an Arbitrary Shape Dynamic Surface Load
The dynamic response of a transversely isotropic, linearly elastic layer bonded to the surface of a half-space of a different transversely isotropic material under arbitrary shape surface loads is considered. With the help of displacements and stresses Green’s functions, an analytical formulation is presented for the determination of the displacements and stresses at any point in both surface l...
متن کامل