An Analytical Method Validation for Atomic Absorption Spectrometry Analisys of Total Zinc from Insulin
نویسندگان
چکیده
abstract: An analytical method validation represents a complete investigation of the materials’ properties, following certain steps, being necessary for “proving the fit for purpose of an analytical method”. The validation procedure demonstrate that a defined validation protocol for an analytical method applied to a specified testing material and a defined concentration of the analyt – named analytic system – fits for a certain analytical purpose. The analytical purpose reflects the obtaining of analytical results with an acceptable degree of accuracy. The scope of the present study is a supplementary validation (linearity, range, accuracy and precision) of flame atomic absorption spectrometry analytical procedure for total zinc analysis from Insulatard Penfill.
منابع مشابه
Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
2. Referenced Documents 2.1 ASTM Standards: D1318 Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method) D3237 Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy D3340 Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer D3605 Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy D3831 Test...
متن کاملDevelopment of ultrasound-assisted emulsification microextraction for the determination of trace zinc and copper by flame atomic absorption spectrometry
In this work, we developed a method based on ultrasound-assisted emulsification microextraction (USAEME) for the determination of zinc and copper by flame atomic absorption spectrometry (FAAS). The method is based on the use of the organic solvent carbon tetrachloride (CCl4) as an extraction solvent. In order to obtain a high enrichment factor, the effect of different parameters affecting the c...
متن کاملIon Pair Dispersive Liquid-Liquid Microextraction for the Determination of Trace Amounts of Copper(II) in Soil, Multivitamin Tablet, Tea and Water Samples Using Flame Atomic Absorption Spectrometry
Ion pair dispersive liquid- liquid microextraction (IP-DLLME) method combined with flame atomic absorption spectrometry was proposed for the determination of trace amounts of copper(II). By using pyrocatechol violet as chelating agent and cetyltrimethyl ammonium bromide as an ion pairing agent, the trace amount of copper(II) was extracted in chloroform. The factors influencing the formation cop...
متن کاملDetermination of Aluminum in Dialysis Concentrates by Atomic Absorption Spectrometry after Coprecipitation with Lanthanum Phosphate
This method was developed for the determination of trace amounts of aluminum(III) in dialysis concentrates using atomic absorption spectrometry after coprecipitation with lanthanum phosfate. The analytical parameters that influenced the quantitave coprecipitation of analyte including amount of lanthanum, amount of phosfate, pH and duration time were optimized. The % recoveries of the analyte io...
متن کاملAir-assisted Liquid Liquid Microextraction Combined with Graphite Furnace Atomic Absorption Spectrometry for Preconcentration and Determination of Trace Amount of Co(II) and Ni(II) Ions in Water Samples
A simple, rapid and efficient method has been developed for the extraction, preconcentration and determination of cobalt (II) and nickel (II) ions in water samples by air-assisted liquid-liquid microextraction (AALLME) coupled with graphite furnace atomic absorption spectrometry (GFAAS). In the proposed method, much less volume of an organic solvent was used as the extraction solvent in the abs...
متن کامل