Shape of a cracking whip.
نویسندگان
چکیده
The crack of a whip is produced by a shock wave created by the supersonic motion of the tip of the whip in the air. A simple dynamical model for the propagation and acceleration of waves in the motion of whips is presented. The respective contributions of tension, tapering, and boundary conditions in the acceleration of an initial impulse are studied theoretically and numerically.
منابع مشابه
A Theoretical and Practical Study of Cracking of an Aluminium Alloy During Side Pressing Using a Finite - Element Analysis
Elastic-plastic finite-element analysis applied to metalforming allows the real macroscopic properties of the workpiece to be incorporated. This paper presents the results of an experimental study of the initiation of cracking in side-pressing of a heat-treated aluminium alloy (Duralloy 2014). Using an F. E. analysis, these are related to various fracture criteria. It is found that the criterio...
متن کاملOrthodontic Management of a Severely Rotated Maxillary Central Incisor with a Modified Whip Appliance in Mixed Dentition Period
Objectives Tooth rotation is one of the most prevalent dental anomalies. Early management of rotated teeth would prevent possible occlusal interferences. The purpose of this case report was to introduce a fixed-removable appliance, which can efficiently correct severely rotated anterior teeth in a short duration of time in mixed dentition period. Case A 7-year-old boy with a Class I malocclusi...
متن کاملInvestigating the effect of AC overlays, reinforced with Geogrid and modified by sasobit on rehabilitation of Reflective cracking
In this paper, it has been attempted to evaluate the performance of asphalt overlays which were reinforced with geogrid, modified by sasobit and combination of them on rehabilitation of reflective cracking. The laboratory tests under dynamic loading in bending mode were conducted to investigate reflective cracking retardation compared to reference samples. The results illustrated that in a cert...
متن کاملCrack Detection in a Simply Supported Rc Beam Using Simplified Laplacian
This paper describes the detection and identification of cracking severity in a reinforced concrete beam using modal data. Experimental modal test was performed on the beam before and after application of load of increasing intensity to induce a single crack at a fixed location. Modal parameters extracted were categorised into hvo groups, namely local response parameter (mode shape data) and gl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physical review letters
دوره 88 24 شماره
صفحات -
تاریخ انتشار 2002