Rapid Mixed Layer Deepening by the Combination of Langmuir and Shear Instabilities: A Case Study
نویسندگان
چکیده
Langmuir circulation (LC) is a turbulent upper-ocean process driven by wind and surface waves that contributes significantly to the transport of momentum, heat, and mass in the oceanic surface layer. The authors have previously performed a direct comparison of large-eddy simulations and observations of the upper-ocean response to a wind event with rapid mixed layer deepening. The evolution of simulated crosswind velocity variance and spatial scales, as well asmixed layer deepening, was only consistent with observations if LC effects are included in the model. Based on an analysis of these validated simulations, in this study the fundamental differences in mixing between purely shear-driven turbulence and turbulence with LC are identified. In the former case, turbulent kinetic energy (TKE) production due to shear instabilities is largest near the surface, gradually decreasing to zero near the base of themixed layer. This stands in contrast to the LC case in which at middepth range TKE production can be dominated by Stokes drift shear. Furthermore, the Eulerian mean vertical shear peaks near the base of the mixed layer so that TKE production by mean shear flow is elevated there. LC transports horizontal momentum efficiently downward leading to an along-wind velocity jet below LC downwelling regions at the base of the mixed layer. Locally enhanced vertical shear instabilities as a result of this jet efficiently erode the thermocline. In turn, enhanced breaking internal waves inject cold deep water into the mixed layer, where LC currents transport temperature perturbation advectively. Thus, LC and locally generated shear instabilities work intimately together to facilitate strongly the mixed layer deepening process.
منابع مشابه
بستههای نسوخته گازی در تراکهای با ساختار نامنظم (علمی-پژوهشی)
Abstract A two-dimensional numerical simulation is performed in the present work to study the structure of a detonation wave in high activation energy mixtures, which are characterized by their turbulent reaction zone structure and unreacted pockets. The process of transverse wave and triple point collision with the channel walls, formation and consumption mechanism of unburnt gas pockets is e...
متن کاملPREDICTING THE STIFFNESS OF BIAXIAL BRAIDED FIBER COMPOSITES BY INCORPORATION OF CARBON NANO FIBER
In this study, carbon nano fibers (CNFs) were mixed into epoxy resin through a magnetic stirrer and again mixed using ultra sonicator. Using hand layup technique, biaxial braided fiber composites were prepared with unfilled, 0.2, 0.5 and 1 wt% CNF. Tensile test and shear test was performed to identify the tensile strength and shear strength of the composites. Fractured surface of the tensile sp...
متن کاملA mathematical model for optimization of strength of concrete: A case study for shear modulus of Rice Husk Ash Concrete
Rice Husk Ash (RHA) is natural Pozzolan containing reactive silica and/or aluminum. When the material is mixed with lime in powdered form and in the presence of water, it will set and harden like cement. This work uses Osadebe’s optimization model to optimize the shear modulus of concrete made from RHA. The strengths predicted by the model are in good agreement with their corresponding experime...
متن کاملReport of a Physical Oceanography Research Project over the Southern Continental Shelf of the Caspian Sea
Abstract The study presents monthly variations of seawater properties, monitoring water column stability and stratification over the southern shelf of the Caspian Sea which depends on collecting data. Field measurements were carried out during 13 cruises along the southern boundary of the sea. Spatial and temporal distributions of temperature, salinity and density were investigated. Monthl...
متن کاملDynamic Stability of Moderately Thick Composite Laminated Skew Plates using Finite Strip Method
The dynamic instability regions of composite laminated skew flat plates subjected to uniform in-plane axial end-loading are investigated. The in-plane loading is assumed as a combination of a time-invariant component and a harmonic time-varying component uniformly distributed along two opposite panel ends’ width. In case of some loading frequency-amplitude pair-conditions, the model is subjecte...
متن کامل