Resistive Hom Load for Superconducting Cavities*
نویسندگان
چکیده
Ferrites and lossy ceramics, used in HOM (higher order mode) loads for superconducting accelerators, have shortcomings such as poor batch-to-batch reproducibility of electromagnetic properties, extremely low electric conductivity at cryogenic temperatures leading to accumulation of charge on the material surface, brittleness, which may cause contamination of the nearby SRF cavities by lossy dust, etc. A proposal to use a resistive material free of these shortcomings is presented.
منابع مشابه
The Interaction between a Beam and a Superconducting Cavity Module: Measurements in CESR and CESR-Phase III Goals*
Plans for the next generation of electron-positron colliders (B-factories and B-factory-like machines) call for high beam currents to produce luminosities of the order of 1033. To store these high currents in a machine, special attention must be paid to the interaction of the beam with discontinuities in the surrounding vacuum chamber. RF cavities are among the biggest perturbations in accelera...
متن کاملHom Couplers for Cern Spl Cavities
Higher-Order-Modes (HOMs) may affect beam stability and refrigeration requirements of superconducting proton linacs such as the SPL, which is studied at CERN as the driver for future neutrino facilities. In order to limit beaminduced HOM effects, CERN considers the use of HOM couplers on the cut-off tubes of the 5-cell superconducting cavities. These couplers consist of resonant antennas shaped...
متن کاملErl 07-1 Thermal Expansion Coefficients of Some Materials Used for Hom Load Absorbers
INTRODUCTION For HOM loads proposed for the Energy Recovery Linac injector cavities we used different materials for absorption, two kinds of ferrites and a ceramic-like material with a trade name “ceralloy”. These materials were brazed or soldered to a metal substrate. One important requirement to the bonding of absorbers and substrate is a very large temperature range where a good mechanical a...
متن کاملOperating Experience with Superconducting Rf at Cesr and Overview of Other Srf Related Activities at Cornell University
In the two years past since 8 RFSC Workshop the major efforts of the SRF group at Cornell University were concentrated on the completion and commissioning of the superconducting RF system for the Cornell Electron Storage Ring (CESR) e+e− collider [1, 2]. Four singlecell niobium higher-order mode (HOM) damped cavities replaced four 5-cell normal conducting RF cavities. The RF system upgrade bega...
متن کاملHom Couplers Design for the Super-3hc Cavity
We report on the design of high order mode (HOM) couplers developed for superconducting (SC) 3 harmonic cavities carried out in the framework of the SUPER 3HC project. The high damping requirements for both longitudinal and transverse modes can be achieved with the appropriate HOM dampers. The results of measurements on a copper model as well as simulations are presented.
متن کامل