Correlation between the optical loss and crystalline quality in erbium-doped GaN optical waveguides.
نویسندگان
چکیده
Erbium-doped GaN (GaN:Er) epilayers were synthesized by metal organic chemical vapor deposition. GaN:Er waveguides were fabricated based on four different GaN:Er layer structures: GaN:Er/GaN/Al2O3, GaN:Er/GaN/AlN/Al2O3, GaN:Er/GaN/Al(0.75)Ga(0.25)N/AlN/Al2O3, and GaN/GaN:Er/GaN/Al2O3. Optical loss at 1.54 μm in these waveguide structures has been measured. It was found that the optical attenuation coefficient of the GaN:Er waveguide increases almost linearly with the GaN (002) x-ray rocking curve linewidth. The lowest measured loss was ~6 dB/cm.
منابع مشابه
Refractive index of erbium doped GaN thin films
GaN is an excellent host for erbium (Er) to provide optical emission in the technologically important as well as eye-safe 1540 nm wavelength window. Er doped GaN (GaN:Er) epilayers were synthesized on c-plane sapphire substrates using metal organic chemical vapor deposition. By employing a pulsed growth scheme, the crystalline quality of GaN:Er epilayers was significantly improved over those ob...
متن کاملCorrelation between crystal structure and optical properties of copper- doped ZnO thin films
ZnO and Cu doped[1] (CZO) thin films were prepared by radio frequency sputtering. The structural and optical properties of thin films were investigated using X-ray diffraction (XRD), atomic force microscopy (AFM), optical spectrophotometer, and photoluminescence (PL) techniques. ZnO thin films showed crystalline and micro-stress defects in the crystal lattice. Annealing of CZO thin films increa...
متن کاملPhotoluminescence and attenuation of spray-pyrolysis-deposited erbium-doped Y2O3 planar optical waveguides.
Erbium-doped Y20 3 planar optical waveguides have been fabricated by spray-pyrolysis deposition. The attenuation spectrum of the waveguide shows peaks that are due to absorption of the erbium ions. The as-deposited layers also show photoluminescence sharply peaking at 1540 nm with additional Stark splitting. The thin layers of Er 3:Y 203 obtained are promising for the realization of integrated-...
متن کاملDesign of 1480-nm diode-pumped Er<Superscript>3</Superscript>-doped integrated optical amplifiers
Erbium-doped Y203 integrated optical amplifiers are designed for low-threshold operation and 3dB amplification. The most important design parameter for minimal threshold, the erbium concentration, is found to have an optimum value of 0.35 at% for a given waveguide structure with 1.0dBcm -1 background loss. The corresponding threshold power is 7 mW. The pump power to obtain 3dB gain is found to ...
متن کاملAn Overview and Feasibility Study of Fabrication Technology and Characterization Techniques of Erbium-Doped Fiber amplifiers in Iran
In this paper, a brief summary of different methods of fabrication of optical preform and fiber is reviewed. Several methods of incorporation of erbium ions into optical preforms are studied. Characterization of the fabricated erbium doped fibers including measurements of refractive index profile, absorption, fluorescence and gain spectra and metastable lifetime are described. It is also expres...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Applied optics
دوره 52 22 شماره
صفحات -
تاریخ انتشار 2013