Measurement and Analysis of In-vessel Component Activation and Gamma Dose Rate Distribution in Joyo

The in-vessel gamma dose rate was measured in the experimental fast reactor Joyo to evaluate the activation of reactor structural components and the radiation exposure of the fiber scope used for in-vessel visual inspection. The measurement system, which requires a wide sensitivity range and high durability in a high-temperature environment, was specifically developed for use in the sodium cooled fast reactor. The gamma-ray detector was calibrated by simulating the actual temperature conditions in Joyo. Using this system, the in-vessel gamma dose rate with cooling times of 450 and 720 days after reactor shutdown was measured in Joyo, which has been operated for 71,000 hours over approximately 30 years. The gamma dose rate was calculated using QAD-CGGP2 code with the gamma source intensity obtained by the ORIGEN2 code. The neutron flux used as input to the ORIGEN2 was evaluated by the Joyo dosimetry method. The ratio between the calculated and experimental values ranged from 1.1 to 2.4, confirming the accuracy of gamma dose rate and component activation calculation.