Nonlinear tapping dynamics of multi-walled carbon nanotube tipped atomic force microcantilevers
نویسندگان
چکیده
The nonlinear dynamics of an atomic force microcantilever (AFM) with an attached multi-walled carbon nanotube (MWCNT) tip is investigated experimentally and theoretically. We present the experimental nonlinear frequency response of a MWCNT tipped microcantilever in the tapping mode. Several unusual features in the response distinguish it from those traditionally observed for conventional tips. The MWCNT tipped AFM probe is apparently immune to conventional imaging instabilities related to the coexistence of attractive and repulsive tapping regimes. A theoretical interaction model for the system using an Euler elastica MWCNT model is developed and found to predict several unusual features of the measured nonlinear response. (Some figures in this article are in colour only in the electronic version)
منابع مشابه
High Resolution Image with Multi-wall Carbon Nanotube Atomic Force Microscopy Tip (RESEARCH NOTE)
In this paper, a simple and reproducible approach for attaching the multi-wall carbon nanotubes (MWNTs) to the apex of the atomic force microscope probe has been proposed. For this purpose, the dielectrophoresis method was applied due to its simple performance, cheapness and reliability. In this method, various parameters such as voltage, frequency, concentration of carbon nanotubes solution an...
متن کاملEffects of Fluid Environment Properties on the Nonlinear Vibrations of AFM Piezoelectric Microcantilevers
Nowadays, atomic-force microscopy plays a significant role in nanoscience and nanotechnology, and is widely used for direct measurement at atomic scale and scanning the sample surfaces. In tapping mode, the microcantilever of atomic-force microscope is excited at resonance frequency. Therefore, it is important to study its resonance. Moreover, atomic-force microscopes can be operated in fluid e...
متن کاملImaging artefacts in atomic force microscopy with carbon nanotube tips
Dynamic atomic force microscopy (dynamic AFM) with carbon nanotube tips has been suggested as an enabling tool for high precision nanometrology of critical dimension features of semiconductor surfaces. We investigate the performance of oscillating AFM microcantilevers with multi-walled carbon nanotube (multi-walled CNT) tips interacting with high aspect ratio structures while in the attractive ...
متن کاملInfluence of the carbon nanotube probe tilt angle on the effective probe stiffness and image quality in tapping-mode atomic force microscopy.
Previous studies have shown that when using carbon nanotubes (CNTs) as tapping-mode AFM probes, their tilt angle with respect to vertical (denoted phi) must be close to 0 degrees to obtain high-quality images and that very poor images are obtained for phi > 30 degrees . Here we present a quantitative theoretical investigation of the effect of phi on tapping-mode AFM imaging for single-wall and ...
متن کاملInvestigation of Multi-Walled Carbon Nanotubes as Electrochemical Electrodes
Individual multi-walled carbon nanotubes were investigated for their usefulness as nanoscale electrochemical electrodes. The nanotubes were mounted on metal-coated atomic force microscopy tips, and the assembly was insulated with Parylene polymer. Approximately 200nm of the nanotube tip was exposed by use of a laser so the entire probe could be immersed in an electrolytic solution with only the...
متن کامل