Modeling, analysis and non-linear control of a novel pneumatic semi-active vibration isolator: a concept validation study
نویسندگان
چکیده
Porumamilla, Hemanth, "Modeling, analysis and non-linear control of a novel pneumatic semi-active vibration isolator: a concept validation study" (2007). Retrospective Theses and Dissertations. Paper 15765.
منابع مشابه
Semi-active and Active Control of an ERF Embedded in Pneumatic Vibration Isolator
In the paper, the Electrorheological fluid(ERF) is embedded in the pneumatic vibration isolator and three kinds of control systems are designed, which experimental results are also compared. The first kind of the control system is the semi-active control system, which is designed for ERF controllable damper. The second kind of the control system is the active control system, which is designed f...
متن کاملAssessment of Semi-Active Tunes Mass Damper Application in Suppressing Seismic-Induced Vibration of an Existing Jacket Platform
In this study, mass, stiffness and damping matrices of the Nosrat jacket; located in Persian Gulf; equipped with Semi Active Tuned Mass Damper (SATMD) system have been derived after modeling the structure in SACS software. Owing to huge number of the degrees of freedom in the model, computation of on-line control of SATMD was time consuming. For this purpose, the size of the model was reduced i...
متن کاملActive Pneumatic Vibration Control by Using Pressure and Velocity Measurements and Adaptive Fuzzy Sliding-Mode Controller
This paper presents an intelligent control strategy to overcome nonlinear and time-varying characteristics of a diaphragm-type pneumatic vibration isolator (PVI) system. By combining an adaptive rule with fuzzy and sliding-mode control, the method has online learning ability when it faces the system's nonlinear and time-varying behaviors during an active vibration control process. Since the pro...
متن کاملRobust Control and μ analysis of Active Pneumatic Suspension
This paper presents a novel concept of active pneumatic suspension which uses an accumulator, airspring, and smart control system to actuate a variable orifice mechanism which connects the airspring to the accumulator. The main objective is to obtain a linear model for this pneumatic suspension so as to use existing advanced linear control methodologies to ascertain the closed loop performance ...
متن کاملAttenuating vibration transmission from a Town Board Station (TBS) to the neighbor residential building using an optimum isolator: A case study
Town Board Stations (TBS) are usually located in residential areas. Pressure reduction through reducing valves in these stations generates considerable amounts of sound and vibrations. These mechanical...
متن کامل