Advanced Acoustic Emission Signal Treatment in the Area of Mechanical Cyclic Loading

نویسندگان

  • P. Mazal
  • L. Pazdera
  • L. Kolar
چکیده

One of promising possibilities of watching of damage course of material exposed to cyclic mechanical loading is using acoustic emission technique (AE). In the signal monitored on the surface of material, it is possible to identify course of a number of processes that appear both on the surface and inside the material of the construction. From this point of view, we can see that this method could provide us with information about the course of fatigue damage and it could help us specify residual fatigue life. Various types of AE records processing that are often used in practice are dealt with. Results gained to date show wide possibilities of application of the method of acoustic emission for the identification of fatigue processes. In this paper, the basic comments of results of experimental measuring are shown that were aimed to possibilities of identification of various stages of fatigue process, realised on electro-resonance loading equipment with the help of acoustic emission technique.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type

Composites have been widely used in the aerospace industry. Due to the requirement of a high safety for such structures, they could be considered for health monitoring. The acoustic emission approach is one of most effective methods for identifying damages in composites. In this article, standard specimens were made from carbon fibers and the epoxy resin, with the [03/902/...

متن کامل

Study of the Frictional Surface Damage Using Acoustic Emission Method

In this study, the change at rubbing surfaces has been investigated experimentally using an acoustic emission signal monitoring system. A steel ring is slipped on the surface of  a metallic sheet to simulate frictional conditions. The mechanical disturbances caused by the movement of the ring produce stress waves propagating along the sheet surface. The out of plane displacement of the sheet su...

متن کامل

Cluster Analysis of Acoustic Emission Signals for Carbon/Epoxy Composite in Four-point Bending Test (RESEARCH NOTE)

Due to the extensive use of composites in various industries and the fact that defects reduce ultimate strength and efficiency during operation, detection of failures in composite parts is very important. The aim of this paper is to use Acoustic Emission (AE) non-destructive method in four-point bending test of carbon/epoxy composite to analyze and examine the failure mechanisms. This method is...

متن کامل

Study of Damaged Zone around Circular Opening Using Acoustic Emission Technique

One of the methods used to investigate the damaged zone in rock structure is the acoustic emission method. This method is based on receiving the elastic waves that are produced by deformation and cracking of the rock mass around the underground excavation. In this research, a study is conducted on the rock samples by a numerical method to investigate the damaged zone caused by the excavat...

متن کامل

Experimental investigations on the softening and ratcheting behaviors of steel cylindrical shell under cyclic axial loading

In this research, softening and ratcheting behaviors of Ck20 alloy steel cylindrical shells were studied under displacement-control and force-control cyclic axial loading and the behavior of hysteresis curves of specimens was also investigated. Experimental tests were performed by a servo-hydraulic INSTRON 8802 machine. The mechanical properties of specimens were determined according to ASTM E8...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2005