Stochastic simulation of tip-sample interactions in atomic force microscopy
نویسندگان
چکیده
Related Articles The additive effect of harmonics on conservative and dissipative interactions J. Appl. Phys. 112, 124901 (2012) Note: Radiofrequency scanning probe microscopy using vertically oriented cantilevers Rev. Sci. Instrum. 83, 126103 (2012) Switching spectroscopic measurement of surface potentials on ferroelectric surfaces via an open-loop Kelvin probe force microscopy method Appl. Phys. Lett. 101, 242906 (2012) Enhanced quality factors and force sensitivity by attaching magnetic beads to cantilevers for atomic force microscopy in liquid J. Appl. Phys. 112, 114324 (2012) Invited Review Article: High-speed flexure-guided nanopositioning: Mechanical design and control issues Rev. Sci. Instrum. 83, 121101 (2012)
منابع مشابه
High Resolution Image with Multi-wall Carbon Nanotube Atomic Force Microscopy Tip (RESEARCH NOTE)
In this paper, a simple and reproducible approach for attaching the multi-wall carbon nanotubes (MWNTs) to the apex of the atomic force microscope probe has been proposed. For this purpose, the dielectrophoresis method was applied due to its simple performance, cheapness and reliability. In this method, various parameters such as voltage, frequency, concentration of carbon nanotubes solution an...
متن کاملAtomic Force Microscopy Application in Biological Research: A Review Study
Atomic force microscopy (AFM) is a three-dimensional topographic technique with a high atomic resolution to measure surface roughness. AFM is a kind of scanning probe microscope, and its near-field technique is based on the interaction between a sharp tip and the atoms of the sample surface. There are several methods and many ways to modify the tip of the AFM to investigate surface properties, ...
متن کاملTip–surface interactions in atomic force microscopy: reactive vs. metallic surfaces
We present ab initio simulations of AFM image formation in the non-contact regime for prototypical reactive semiconductor and metal surfaces: InP(1 1 0)-1 1 and Cu(0 0 1). For the reactive surface the effect of tip morphology of the tip apex was also studied. The nature of the tip apex alters the local tip reactivity and can lead to reversal of the apparent AFM surface corrugation. We find that...
متن کاملThe effect of drive frequency and set point amplitude on tapping forces in atomic force microscopy: simulation and experiment.
In tapping mode atomic force microscopy (AFM), a sharp probe tip attached to an oscillating cantilever is allowed to intermittently strike a surface. By raster scanning the probe while monitoring the oscillation amplitude of the cantilever via a feedback loop, topographical maps of surfaces with nanoscale resolution can be acquired. While numerous studies have employed numerical simulations to ...
متن کاملOptimization and calibration of atomic force microscopy sensitivity in terms of tip-sample interactions in high-order dynamic atomic force microscopy
in terms of tip-sample interactions in high-order dynamic atomic force microscopy Yu Liu, Qiuquan Guo, Heng-Yong Nie, W. M. Lau, and Jun Yang Department of Mechanical and Materials Engineering, University of Western Ontario, London, Ontario N6A 5B9, Canada Biomedical Engineering Program, University of Western Ontario, London, Ontario N6A 5B9, Canada Surface Science Western, University of Wester...
متن کامل