Design and Algorithm Verification of a Gyroscope-Based Inertial Navigation System for Small-Diameter Spaces in Multilateral Horizontal Drilling Applications
نویسندگان
چکیده
In the recent years horizontal drilling (HD) has become increasingly important in oil and gas exploration because it can increase the production per well and can effectively rework old and marginal vertical wells. The key element of successful HD is accurate navigation of the drill bit with advanced measurement-while-drilling (MWD) tools. The size of the MWD tools is not significantly restricted in vertical wells because there is enough space for their installation in traditional well drilling, but the diameter of devices for HD must be restricted to less than 30 mm for some applications, such as lateral drilling from existing horizontal wells. Therefore, it is essential to design miniature devices for lateral HD applications. Additionally, magnetometers in traditional MWD devices are easily susceptible to complex downhole interferences, and gyroscopes have been previously suggested as the best avenue to replace magnetometers for azimuth measurements. The aim of this paper is to propose a miniature gyroscope-based MWD system which is referred to as miniature gyroscope-based while drilling (MGWD) system. A prototype of such MGWD system is proposed. The device consists of a two-axis gyroscope and a three-axis accelerometer. Miniaturization design approaches for MGWD are proposed. In addition, MGWD data collection software is designed to provide real-time data display and navigation algorithm verification. A fourth-order autoregressive (AR) model is introduced for stochastic noise modeling of the gyroscope and the accelerometer data. Zero velocity and position are injected into a Kalman filter as a system reference to update system states, which can effectively improve the state observability of the MGWD system and decrease estimation errors. Nevertheless, the azimuth of the proposed MGWD system is not observable in the Kalman filter, and reliable azimuth estimation remains a problem.
منابع مشابه
Gyroscope Drift Error Analysis in the Position-Independent Navigation Algorithm of a stable platform Inertial System
This paper deals with analyzing gyroscope drift error in the position-independent navigation algorithm of a stable platform inertial system. Most of the stable platform navigation algorithms proposed in the literature have drawbacks of estimating position rates for alignment commands. Not only the estimating position rates are the basic source of position errors, but they also make the alignmen...
متن کاملApplications of Inertial Navigation Systems in Medical Engineering
Inertial navigation systems are of the most important and practical systems in determining the velocity, position and attitude of the vehicles and different equipment. In these systems, three accelerometers and three gyroscopes are used to measure linear accelerations and angular velocities of vehicles, respectively. By using the output of these sensors and special inertial algorithms in differ...
متن کاملPull-In Instability and Vibrations of a Beam Micro-Gyroscope
Gyroscopes are used as rotation rate sensors. Conventional gyroscopes are heavy and bulky, which creates important problems regarding their usage in different applications. Micro-gyroscopes have solved these problems due to their small size. The beam micro-gyroscope is one of the popular types of inertial sensors. Their small dimensions and low energy consumption are key reasons for their popul...
متن کاملParticle Filter with Novel Nonlinear Error Model for Miniature Gyroscope-Based Measurement While Drilling Navigation
The derivation of a conventional error model for the miniature gyroscope-based measurement while drilling (MGWD) system is based on the assumption that the errors of attitude are small enough so that the direction cosine matrix (DCM) can be approximated or simplified by the errors of small-angle attitude. However, the simplification of the DCM would introduce errors to the navigation solutions ...
متن کاملA Long-Term Performance Enhancement Method for FOG-Based Measurement While Drilling
In the oil industry, the measurement-while-drilling (MWD) systems are usually used to provide the real-time position and orientation of the bottom hole assembly (BHA) during drilling. However, the present MWD systems based on magnetic surveying technology can barely ensure good performance because of magnetic interference phenomena. In this paper, a MWD surveying system based on a fiber optic g...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Micromachines
دوره 6 شماره
صفحات -
تاریخ انتشار 2015