Modified Doherty Power Amplifier for Wider Band
نویسنده
چکیده
Wireless communication system are developing rapidly, due to which new standards like WIMAX and 4G Long Term Evaluating(LTE) with a purpose of achieving high data rate result in high end applications such as high speed internet, video conferences and broadband width. These applications require mobile base stations at the transmitter as well as at receiver (T/R) to support features like multiple bands, multiple modes, higher BW and less power consumption. The design and implementation of multi-standard transceivers for wireless mobile system is very complex task. In this paper we discuss the design of a wider band Doherty Amplifier, which operational frequency of 3 GHz to 3.75 GHz. The development of proposed DPA is based on techniques of inserting wider band compensators along with second and third harmonic tuning at the output of the GaN HEMT main and peak amplifier. In this work, the basic constraints in the basic DPA is /4 impendence transformer has been eliminated with the help of Branch Line Coupler (BLC). The designed amplifier gives the drain efficiency 70% 75% at about 46-43 dBm output power and gain around 12 dB in the desired band.
منابع مشابه
A 28-36 GHz Optimized CMOS Distributed Doherty Power Amplifier with A New Wideband Power Divider Structure
Background and Objectives: In this paper, a new design strategy was proposed in order to enhance bandwidth and efficiency of power amplifier. Methods: To realize the introduced design strategy, a power amplifier was designed using TSMC CMOS 0.18um technology for operating in the Ka band, i.e. the frequency range of 26.5-40GHz. To design the power amplifier, first a power divider (PD) with a ver...
متن کاملHigh-Power Inverted Doherty Power Amplifier for Broadband Application
Abstract This paper presents a high-power inverted Doherty power amplifier for broader operational bandwidth. After analyzing two operation modes according to the load modulation of the Doherty power amplifier, the inverted Doherty structure was selected. In the design, the load impedances for optimum broadband characteristics at both the back-off and peak power levels. The Doherty power amplif...
متن کاملA Tradeoff Design of Broadband Power Amplifier in Doherty Configuration Utilizing a Novel Coupled-Line Coupler
A broadband power amplifier designed and implemented in Doherty configuration is illustrated in this paper. Both input and output networks adopt the broadband matching topology. Additionally a compensation network, consisting of a series transmission line shunted with a capacitance, is set behind the peak amplifier to avoid in-band power leakage in the low-power section while at the cost of pea...
متن کاملEfficiency Enhancement of Base Station Power Amplifiers Using Doherty Technique
The power amplifiers are typically the most power-consuming block in wireless communication systems. Spectrum is expensive, and newer technologies demand transmission of maximum amount of data with minimum spectrum usage. This requires sophisticated modulation techniques, leading to wide, dynamic signals that require linear amplification. Although linear amplification is achievable, it always c...
متن کاملNon-linear modeling, analysis, design and simulation of a solid state power amplifier based on GaN technology for Ku band microwave application
A new non-linear method for design and analysis of solid state power amplifiers is presented and applied to an aluminum gallium nitride, gallium nitride (AlGaN-GaN) high electron-mobility transistor (HEMTs) on silicon-carbide (SiC) substrate for Ku band (12.4 13.6 GHz) applications. With combining output power of 8 transistors, maximum output power of 46.3 dBm (42.6 W), PAE of 43% and linear ga...
متن کامل