A High Frequency-Link Bidirectional DC-DC Converter for Super Capacitor-Based Automotive Auxiliary Electric Power Systems
نویسندگان
چکیده
This paper presents a bidirectional DC-DC converter suitable for low-voltage super capacitor-based electric energy storage systems. The DC-DC converter presented here consists of a full-bridge circuit and a current-fed push-pull circuit with a high frequency (HF) transformer-link. In order to reduce the device-conduction losses due to the large current of the super capacitor as well as unnecessary ringing, synchronous rectification is employed in the super capacitor-charging mode. A wide range of voltage regulation between the battery and the super capacitor can be realized by employing a Phase-Shifting (PS) Pulse Width Modulation (PWM) scheme in the full-bridge circuit for the super capacitor charging mode as well as the overlapping PWM scheme of the gate signals to the active power devices in the push-pull circuit for the super capacitor discharging mode. Essential performance of the bidirectional DC-DC converter is demonstrated with simulation and experiment results, and the practical effectiveness of the DC-DC converter is discussed.
منابع مشابه
Optimal Intelligent Control of Plug-in Fuel Cell Electric Vehicles in Smart Electric Grids
In this paper, Plug-in Fuel Cell Electric Vehicle (PFCEV) is considered with dual power sources including Fuel Cell (FC) and battery Energy Storage. In order to respond to a transient power demand, usually supercapacitor energy storage device is combined with fuel cell to create a hybrid system with high energy density of fuel cell and the high power density of battery. In order to simulate the...
متن کاملA Bidirectional DC-DC Convreter with Zero Voltage Switching Capability for Energy Storage Application
In this paper, a bidirectional DC-DC converter with high power density for energy storage application is proposed. The presented converter provides power transfer in both directions only with adjusting phase shift angle. Zero voltage switching (ZVS) in both turn on and turn off moments of all switches is the major capability of the converter that makes it suitable for high power applications. Z...
متن کاملA Non Isolated Bidirectional Dc-dc Converter with Soft Switching
Power electronic converter systems for applications such as telecom, automotive, and space can have dc voltage buses that are backed up with batteries or super-capacitors. These batteries or super-capacitors are connected to the buses with bidirectional dc–dc converters which allow them to discharged or charged, depending on the operating conditions. Bidirectional dc–dc converters may be isolat...
متن کاملDC/DC Step-Up Converters for Automotive Applications: a FPGA Based Approach
One emerging application of power electronics is the driving of piezoelectric actuators. These actuators can be used for different kinds of application. They are employed for micro and nano positioning tasks as well as hydraulic or pneumatic valves, where they replace magnetic control elements. Piezoelectric actuators have some specific advantages such as high resolution of the displacement, ex...
متن کاملA Novel Bi-Directional Isolated Power Flow Dc–Dc Converter for Hybrid System
In Electrical power systems in future uninterruptible power supplies or electrical vehicles may employ hybrid energy sources, such as fuel cells and super capacitors. It will be necessary to efficiently draw the energy from these two sources as well as recharge the energy storage elements by the dc bus. In this paper, a bidirectional isolated dc–dc converter controlled by phase-shift angle and ...
متن کامل