Fabricating Power Plant Components by Direct Laser Deposition
ثبت نشده
چکیده
منابع مشابه
Multiple beam splitter using volumetric multiplexed Fresnel zone plates fabricated by ultrafast laser-writing.
A simple approach to producing a 1×N beam splitter is demonstrated by fabricating a volumetric multiplex phase Fresnel zone plate in bulk transparent material. This comprised four layers of zone plates created in borosilicate glass by femtosecond laser direct-writing, each shifted laterally relative to the illumination axis, creating four separate beamlets. Since the power transmitted in each b...
متن کاملPulsed Laser Deposition of Diamond-like Carbon Thin Films: Ablation Dynamics and Growth
Thin films of diamond-like carbon have been grown by pulsed laser deposition using a Nd:YAG laser at 532 nm. Time-of-flight mass spectroscopy was used to investigate the effects of laser power density and background gas pressure on the plume characteristics including the species in the plume and the kinetic energy distribution of each species. We found that with increasing laser power density (...
متن کاملRemanufacturing of turbine blades by laser direct deposition with its energy and environmental impact analysis
Laser direct deposition provides an attractive and cost effective means for repairing or remanufacturing high value engineering components. This study demonstrates the successful repair of defective voids in turbine airfoils based on a new semi-automated geometric reconstruction algorithm and a laser direct deposition process. A Boolean difference between the original defective model and the fi...
متن کاملInvestigating the microstructure and hardness of 17-4PH steel and Stellite cladded by direct laser deposition process on 17-4PH steel substrate
The purpose of this research is to laser cladding of stellite6 and stainless steel 17-4PH powders on the substrate of stainless steel 17-4PH, and investigate its solidification microstructure. The results showed that the microstructure of the stellite6 cladding has a cobalt solid solution ground phase with an FCC structure and Cr7C3 and Cr23C6 carbides. Also, the values of the primary dendrit...
متن کاملInvestigating the microstructure and hardness of 17-4PH steel and Stellite cladded by direct laser deposition process on 17-4PH steel substrate
The purpose of this research is to laser cladding of stellite6 and stainless steel 17-4PH powders on the substrate of stainless steel 17-4PH, and investigate its solidification microstructure. The results showed that the microstructure of the stellite6 cladding has a cobalt solid solution ground phase with an FCC structure and Cr7C3 and Cr23C6 carbides. Also, the values of the primary dendrit...
متن کامل