Rhic 28 Mhz Accelerating Cavity System*
نویسندگان
چکیده
The 28 MHz accelerating system consists of a quarter wave cavity driven by an inductively coupled 100kW tetrode amplifer and 1kW solid state driver amplifer. 40dB of rf feedback closed around the cavity and amplifers reduces small perturbations within the loop by a factor of 100, and reduces the time required to shift the phase at transition by a factor of 10, limited by the saturation of the drive chain. The cavity is tuned over a 200kHz range by a mechanical tuner which varies the gap capacitance. Broadband HOM damping is provided by two orthogonal loop coupled high pass filters. Design parameters and commissioning results are presented. .
منابع مشابه
IBS and Expected Luminosity Performance For RHIC Beams At Top Energy With 56 MHz SRF Cavity
متن کامل
RF-TEST OF A 324-MHz, 3-MeV, H- RFQ STABILIZED WITH PISL'S
A 324-MHz, 3.115-m long, four-vane-type, radio-frequency quadrupole (RFQ) linac, which will be used as the most upstream accelerating cavity of the KEK/JAERI Joint Project for high-intensity proton accelerator facility, is under development at KEK. It was designed to accelerate a 30-mA H beam from 50 keV to 3 MeV with a 3% duty factor. The accelerating field of the RFQ cavity are stabilized aga...
متن کاملThe Ipns Rcs Rf System Third Cavity Upgrade*
The IPNS RCS is a rapid cycling synchrotron used to accelerate protons from 50 MeV to 450 MeV, 30 times per second. Currently, two single-gap, ferrite-loaded coaxial cavities, located 180o apart, provide a total peak accelerating voltage of approximately 21 kV over the 2.2 MHz to 5.1 MHz revolution frequency band. An amplifier chain, which includes a 2 kW predriver, a 20 kW driver and a 100 kW ...
متن کاملInvestigation of over Voltages in the Anode-grid Cavity of the 200 Mhz Pulse Power Amplifier of the Mmf
RF system of the Moscow Meson Factory DTL consists of the 198,2 MHz four stage amplifier with the last one (PA) connected to the high quality tank (QT ~ 10 5 ) by a long coaxial transmitting line (CTL). During of the PA tuning it is need not only to reach a demanded level of the accelerating field in the tank but to decrease cross coupling links between the two fast feedback control systems, st...
متن کاملA 201 Mhz Rf Cavity Design with Non-stressed Pre-curved Be Windows for Muon Cooling Channels*
We present a 201-MHz RF cavity design for muon cooling channels with non-stressed and pre-curved Be foils to terminate the beam apertures. The Be foils are necessary to improve the cavity shunt impedance with large beam apertures needed for accommodating large transverse size muon beams. Be is a low-Z material with good electrical and thermal properties. It presents an almost transparent window...
متن کامل