RFID Label Tag Design for Metallic Surface Environments

نویسندگان

  • Chong Ryol Park
  • Ki Hwan Eom
چکیده

This paper describes a metal mount RFID tag that works reliably on metallic surfaces. The method proposes the use of commercial label type RFID tags with 2.5 mm thick Styrofoam103.7 with a relative permittivity of 1.03 attached on the back of the tag. In order to verify the performance of the proposed method, we performed experiments on an electric transformer supply chain system. The experimental results showed that the proposed tags can communicate with readers from a distance of 2 m. The recognition rates are comparable to those of commercial metallic mountable tags.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Analysis of Low Profile UHF RFID Tag Antennas and Performance Evaluation in Presence of a Metallic Surface

Passive UHF RFID systems have drawn considerable attention because these can provide a long reading range, high data rate and small antenna size. However, a passive UHF RFID system has challenges in tagging a metallic object due to the effects of conducting materials on the tag antenna performance. This paper proposes two widely used label-type antennas: folded dipole antenna and meandered dipo...

متن کامل

Small Wideband RFID Tag Antenna Mountable on Metallic Surfaces

The RFID (Radio Frequency Identification) system has recently become very popular in many industries. Inductively-coupled short-range RFIDs have already been used, but the demand for long-range identification has increased. Consequently, the RFID frequency has gone into the microwave region, which means that the tag antenna design has become an important factor in maximizing the read range of t...

متن کامل

UHF RFID Tag Antenna Using Meander Patch for Metallic Object

The use of radio frequency identification (RFID) system has increased noticeably in recent years. The tag antenna has been particularly influential in the performance of RFID system. Many applications require tag antennas to be of low profile mounted on electrically metallic objects. Several designs have been developed for RFID patch-type antennas or planar inverted-F antennas (PIFAs) mountable...

متن کامل

Design and Implementation of Field Programmable Gate Array Based Baseband Processor for Passive Radio Frequency Identification Tag (TECHNICAL NOTE)

In this paper, an Ultra High Frequency (UHF) base band processor for a passive tag is presented. It proposes a Radio Frequency Identification (RFID) tag digital base band architecture which is compatible with the EPC C C2/ISO18000-6B protocol. Several design approaches such as clock gating technique, clock strobe design and clock management are used. In order to reduce the area Decimal Matrix C...

متن کامل

Miniaturized Metal Mount Minkowski Frac- Tal Rfid Tag Antenna with Complementary Split Ring Resonator

This paper proposes miniature radio frequency identification (RFID) tag antenna designed to operate on metallic objects, in the UHF frequency range (915MHz), without significantly degrading its read range. The antenna structure is composed of two parts: Part 1 comprises two square patches electrically connected to the ground plane through vias while Part 2 is an unconnected inter-layer consisti...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره 11  شماره 

صفحات  -

تاریخ انتشار 2011