Comparison between ultrathin films of YSZ deposited at the solid oxide fuel cell cathode/electrolyte interface by atomic layer deposition, dip-coating or sputtering

The effect of an 80 nm YSZ interfacial layer, deposited onto a YSZ pellet by different techniques (dip-coating, sputtering and atomic layer deposition) at the SOFC cathode/electrolyte interface to allow a maximum adhesion of the thick cathode layer, was thoroughly analysed. The LSM cathode was deposited on the solid electrolyte by painting and sintered in air at 1200°C for 2 h. The morphological and structural analyses of the samples were performed by scanning electron microscopy and X-ray diffraction; their electrical properties were examined between 390 and 700°C by electrochemical impedance spectroscopy. The impedance responses showed three different contributions. The highfrequency arc is attributed to the YSZ electrolyte. The electrode processes associated with the mediumand lowfrequency arcs were discussed. The electrochemical performance was influenced by the microstructure at the electrode/electrolyte interface.