Intermediate Strain - Rate LoadingExperiments - Techniques and Applications
نویسندگان
چکیده
Gas guns and velocity interferometric techniques have been used to determine the loading behavior of AD995 alumina rods 19 mm in diameter by 75 mm and 150 mm long, respectively. Graded-density materials were used to impact both bare and sleeved alumina rods while the velocity interferometer was used to monitor the axial-velocity of the free end of the rods. Results of these experiments demonstrate that (1) a’time-dependent stress pulse generated during impact allows an efficient transition from the initial uniaxial strain loading to a uniaxial stress state as the stress pulse propagates through the rod, and (2) the intermediate loading rates obtained in this configuration lie between split Hopkinson bar and shock-loading techniques.
منابع مشابه
Influence of High Strain Rates on the Mechanical Behavior of High-Manganese Steels
In this work, dynamic mechanical properties of three high-manganese steels with TRIP/TWIP or fully TWIP characteristics are studied. High strain rate experiments in the range of true strain rates between ~500 and 1800 /s are conducted using a dynamic torsional testing setup. All the three steels show a positive strain rate sensitivity in the intermediate range of strain rates (up to 500 /s). Bu...
متن کاملHopkinson bar techniques for the intermediate strain rate testing of bovine cortical bone.
Detailed knowledge of the dynamic viscoelastic properties of bone is required to understand the mechanisms of macroscopic bone fracture in humans, and other terrestrial mammals, during impact loading events (e.g. falls, vehicle accidents, etc.). While the dynamic response of bone has been studied for several decades, high-quality data remain limited, and it is only within the last decade that t...
متن کاملza Hopkinson bar techniques for the intermediate strain rate testing of bovine cortical bone
Detailed knowledge of the dynamic viscoelastic properties of bone is required to understand the mechanisms of macroscopic bone fracture in humans, and other terrestrial mammals, during impact loading events (e.g. falls, vehicle accidents, etc.). While the dynamic response of bone has been studied for several decades, high-quality data remain limited, and it is only within the last decade that t...
متن کاملThe Effect of Bottom-up/Top- down Techniques on Lower vs. Upper -Intermediate EFL Learners’ Listening Comprehension
Listening is regarded as an interactive process involving decoding of information. This study was launched to find out the impact of bottom-up (BU) and top-down (TD) techniques on Iranian lower and upper intermediate learners’ listening comprehension. We selected a total of 120 participants in six intact classes, three lower intermediate and three upper intermediate. The proficiency level of th...
متن کاملModeling of Compression Curves of Flexible Polyurethane Foam with Variable Density, Chemical Formulations and Strain Rates
Flexible Polyurethane (PU) foam samples with different densities and chemical formulations were tested in quasi-static stress-strain compression tests. The compression tests were performed using the Lloyd LR5K Plus instrument at fixed compression strain rate of 0.033 s-1 and samples were compressed up to 70% compression strains. All foam samples were tested in the foam rise direction and their ...
متن کامل