Short Communication Isotope effect of hydrogen release in metal/oxide/n-silicon tunneling diodes
نویسندگان
چکیده
The metal/oxide/n-silicon tunneling diodes with hydrogen (deuterium) passivated Si/SiO2 interface are stressed under hole-injection conditions to investigate the mechanism of gate oxide degradation. Although the isotope effect on soft breakdown was previously observed in the deuterium-annealed metal/oxide/p-silicon devices, no isotope effect on the oxide soft breakdown was observed in the metal/oxide/n-silicon devices. However, the time evolution of electroluminescence indeed shows the isotope effect on the interface states density at the Si/SiO2 interface of the metal/oxide/nsilicon devices. This suggests that there is an isotope effect on the hydrogen (deuterium)-release at Si/SiO2 interface under hole current stress from the gate electrodes, but the released hydrogen moves to the bulk Si (not oxide) due to the direction of the electric field. This can explain that the isotope effect is observed in the electroluminescence measurement, but not in the soft breakdown measurement. The hydrogen released to the bulk Si is not responsible for the soft breakdown, and the tunneling-hole-induced traps in the oxide may be responsible. 2003 Published by Elsevier Science Ltd.
منابع مشابه
Enhanced reliability of electroluminescence from metal–oxide–silicon tunneling diodes by deuterium incorporation
The reliability of electroluminescence from metal–oxide–silicon ~MOS! tunneling diodes was improved by the incorporation of deuterium. The deuterium was incorporated by the deuterium prebake and the postoxide deuterium annealing. At constant current stress of 100 mA, a deuterium-treated n-channel MOS tunneling light-emitting diode shows that the integrated light emission intensity increases sli...
متن کاملOxide Roughness Effect on Tunneling Current of MOS Diodes
Two-dimensional (2-D) device simulation is used to investigate the tunneling current of metal ultra-thin-oxide silicon tunneling diodes with different oxide roughness. With the conformal nature of ultrathin oxide, the tunneling current density is simulated in both direct tunneling and Fowler–Nordheim (FN) tunneling regimes with different oxide roughness. The results show that oxide roughness dr...
متن کاملRoom-Temperature Electroluminescence from Metal-Oxide-Silicon-Tunneling Diodes on (110) Substrates
We report the band-edge electroluminescence at room temperature from metal-oxide-silicon tunneling diodes on (110) substrates. An electron-hole plasma recombination model can be used to fit the emission line shape. The reliability of this electroluminescence is studied and the emission intensity varies within 10% during a 2.5× 104 C/cm2 stress. A comprehensive illustration composed of localized...
متن کاملRoom-temperature electroluminescence from electron-hole plasmas in the metal–oxide–silicon tunneling diodes
An electron-hole plasma recombination model is used to fit the room-temperature electroluminescence from metal–oxide–silicon tunneling diodes. The relatively narrow line shape in the emission spectra can be understood by the quasi-Fermi level positions of electrons and holes, which both lie in the band gap. This model also gives a narrower band gap than that of bulk silicon. The surface band be...
متن کاملElectroluminescence at Si Bandgap Energy from MetahOxide-Semiconductor Tunneling Diodes
We report room-temperature electroluninescence at Si bandgap energy from Metal-Oxide-Semiconductor (MOS) tunneling diodes. The Ultrathin gate oxide with thickness 1 3 urn was grown by rapid thennal oxidation (RTO) to allow significant current to tunnel through. The measured EL efficiency of the MOS tunneling diodes increases with the injection current and could be in the order of iO, which exce...
متن کامل