Holographic head-mounted display with RGB light emitting diode light source.
نویسندگان
چکیده
A compact head-mounted holographic three-dimensional display with an RGB light-emitting diode (LED) light source is developed. Issues regarding full-color holographic image design and the quality associated with the use of an LED light source are investigated. The accommodation effect and background noise in the proposed system are discussed based on experimental observation.
منابع مشابه
Comparative evaluation of the effect of Light Emitting Diode (LED) and Quartz Tungsten Halogen (QTH) light curing units on color stability of Filtek Z350 XT
Introduction:Discoloration of the resin-based composites is a common problem in restorative dentistry. There are many factors associated with the discoloration of dental materials in the oral environment. The purpose of this study was to evaluate the color changes in a nano-composite cured with a quartz-tungsten-halogen (QTH) and light emitting diode (LED) unit. Methods:80 disk-shaped specim...
متن کاملFemtosecond digital lensless holographic microscopy to image biological samples.
The use of femtosecond laser radiation in digital lensless holographic microscopy (DLHM) to image biological samples is presented. A mode-locked Ti:Sa laser that emits ultrashort pulses of 12 fs intensity FWHM, with 800 nm mean wavelength, at 75 MHz repetition rate is used as a light source. For comparison purposes, the light from a light-emitting diode is also used. A section of the head of a ...
متن کاملAnalysis and optimization on the angular color shift of RGB OLED displays
Microcavites contribute to enhancing the optical efficiency and color saturation of an organic light emitting diode (OLED) display. A major tradeoff of the strong cavity effect is its apparent color shift, especially for RGB-based OLED displays, due to their mismatched angular intensity distributions. To mitigate the color shift, in this work we first analyze the emission spectrum shifts and an...
متن کاملEvaluation of the Effect of Protective Sleeve on Output Intensity of Light Emitting Diode Light Cure Units
Aim: The purpose of this study was to compare the difference in the output intensity of Light Emitting Diode (LED) light cure (LC) devices with and without a protective sleeve and its clinical significance. Materials and Methods: The output intensity of 152 LC units in dental offices across the state of Odisha were examined. The collection of related information included an average number of e...
متن کاملFlexible GaN LED on a Polyimide Substrate for Display Applications
The flexible GaN-based light emitting diode (LED) has been fabricated on a plastic substrate for flexible display applications. The epitaxial structures of the GaN LED arrays are transferred onto a flexible substrate using standard soft lithography technology and connected to a source-meter by metal lines. To verify the mechanically and optically stable characteristics of the GaN LEDs on the fl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics express
دوره 22 6 شماره
صفحات -
تاریخ انتشار 2014