Polarization change induced by a galvanometric optical scanner.
نویسندگان
چکیده
We study the optical properties of a two-axis galvanometric optical scanner constituted by a pair of rotating planar mirrors, focusing our attention on the transformation induced on the polarization state of the input beam. We obtain the matrix that defines the transformation of the propagation direction of the beam and the Jones matrix that defines the transformation of the polarization state. Both matrices are expressed in terms of the rotation angles of two mirrors. Finally, we calculate the parameters of the general rotation in the Poincaré sphere that describes the change in the polarization state for each mutual orientation of the mirrors.
منابع مشابه
Modeling and Calibration of a Novel One-Mirror Galvanometric Laser Scanner
A laser stripe sensor has limited application when a point cloud of geometric samples on the surface of the object needs to be collected, so a galvanometric laser scanner is designed by using a one-mirror galvanometer element as its mechanical device to drive the laser stripe to sweep along the object. A novel mathematical model is derived for the proposed galvanometer laser scanner without any...
متن کاملArticleModeling and Calibration of a Novel One-Mirror Galvanometric Laser ScannerChengyi Yu 1
A laser stripe sensor has limited application when a point cloud of geometric samples on the surface of the object needs to be collected, so a galvanometric laser scanner is designed by using a one-mirror galvanometer element as its mechanical device to drive the laser stripe to sweep along the object. A novel mathematical model is derived for the proposed galvanometer laser scanner without any...
متن کاملEfficient Confocal Microscopy with a Dual-Wedge Scanner
Confocal microscopes achieve high spatial resolution by focusing both a light source and a detector to a single point with an objective having a high numerical aperture. In order to produce an image, it is then necessary to scan this common focal spot through the specimen, and it is often important to image the full field of view in a short time. In order to avoid vignetting, the scanning must ...
متن کاملCoherent microscopy by laser optical feedback imaging (LOFI) technique.
The application of the non-conventional imaging technique LOFI (laser optical feedback imaging) to coherent microscopy is presented. This simple and efficient technique using frequency-shifted optical feedback needs the sample to be scanned in order to obtain an image. The effects on magnitude and phase signals such as vignetting and field curvature occasioned by the scanning with galvanometric...
متن کاملImage distortion and its correction in linear galvanometric mirrors-based laser-scanning microscopy.
To simplify imaging focusing and calibration tasks, a laser-scanning microscope needs to scan ata moderate frame rate. The inertia of a galvanometric scanner leads to time delays when following external commands, which subsequently introduces image distortions that deteriorate as scan frequency increases. Sinusoidal and triangular waveforms were examined as fast axis driving patterns. The inter...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of the Optical Society of America. A, Optics, image science, and vision
دوره 27 9 شماره
صفحات -
تاریخ انتشار 2010