Continuous-flow laser synthesis of large quantities of iron oxide nanowires in solution.
نویسندگان
چکیده
Large quantities of iron oxide nanowires are rapidly synthesized at room temperature by pulsed-laser (248 nm) ablation of iron powder under methanol. By introducing a stream of methanol, a continuous flow of nanoscale products is collected. Through control of the flow rate, and hence the residence time of the products within the growth vessel, their morphology can be controlled. At high collection rates a lamellate 'nanobelt' morphology is observed, whereas at low collection rates nanowires dominate. Chemical and structural characterization suggests that the as-synthesized products have the stoichiometry of the goethite [FeO(OH)] phase. Annealing at temperatures above 400 °C crystallizes the products as hematite (α-Fe(2)O(3)).
منابع مشابه
Photo-Chemical Synthesis of Iron Oxide Nanowires Induced by Pulsed Laser Ablation of Iron Powder in Liquid Media
Iron oxide nanowires are synthesized by photochemical method through nanosecond pulsed laser ablation of iron powder in liquid media. The synthesis is tried using various wavelengths (248 and 532 nm) of pulsed laser at different liquids (water, ethanol, methanol, isopropanol and glycol). The solution of iron oxide nanowires is obtained only in methanol when the iron powder (size < 60 μm) is irr...
متن کاملUsing selective sequential extraction techniques to evaluate tendency of soil fractions in Cd removal by Fe3O4 nanoparticles in continuous flow system
Use of nanotechnology has proven to be a promising approach toward remediation of all phases of environment. The aim of this work is to investigate the effects of different parameters on using iron III oxide nanoparticles in a continuous flow configuration for the removal of Cd2+ ionsfrom contaminated soils. Also selective sequential extraction tests are carried out to evaluate the nanoparticle...
متن کاملSolution-phase synthesis of single-crystalline iron phosphide nanorods/nanowires.
A solution-phase route for the preparation of single-crystalline iron phosphide nanorods and nanowires is reported. We have shown that the mixture of trioctylphosphine oxide (TOPO) and trioctylphosphine (TOP), which are commonly used as the solvents for semiconductor nanocrystal synthesis, is not entirely inert. In the current process, TOP, serving as phosphor source, reacts with Fe precursors ...
متن کاملInvestigation of the effect of Argon flow on the morphology of B4C nanoparticles synthesized by the VLS method
In this paper, new various morphologies of boron carbide were successfully synthesized using carbon black, activated carbon and boron oxide precursors as well as using cobalt nanoparticles as catalysts. Almost the whole morphology of synthesized boron carbide are consisted of smooth nanowires and nanobelts. With decreasing the carbon black particles size from 29 nm to 13 nm (29, 23, 17 and 13),...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Nanotechnology
دوره 19 20 شماره
صفحات -
تاریخ انتشار 2008