Experimental Verification of the Behaviour of the Different Expressions for Measuring Amplitude Dependent Damping
نویسنده
چکیده
The agreement between the intrinsic damping, obtained from the sustained oscillations measurements, and the values measured directly in forced oscillations has been verified. Therefore, it is possible to measure directly the intrinsic damping from forced oscillations, without additional calculations and with minor effort. At the same time the damping behaviour measured by different modes with a torsion pendulum, i. e. forced oscillations, sustained oscillations and free decay, in presence of amplitude dependent damping was also studied and similar results are obtained..
منابع مشابه
تعیین تئوری - تجربی پارامترهای ترک غیرخطی در تیر ترکدار تحت ارتعاشات غیرخطی کم دامنه
In the vibration of a cracked structure with small amplitude oscillations, the crack necessarily is not fully open or fully closed. Therefore, in order to provide a realistic model for the crack, one should relate the stiffness and damping at the crack location to the amount of the opening of the crack. In this study, a continuous model for vibration of a beam with a fatigue crack under low amp...
متن کاملNew expressions to estimate damping in direct displacement baseddesign for special concentrically-braced frames
Different expressions have been developed to determine damping of structures based on various hysteretic models and ductility levels. Since Slenderness ratio is an important parameter on the hysteretic behavior of special concentrically- braced frames (SCBF), in this paper new expressions for determination of damping of such frames are developed based on slenderness ratio and ductility. Two typ...
متن کاملModelling and Test Verification of Suspension Optimal Damping Ratio for Electric Vehicles Considering Occupant-cushion and In-wheel Motor Effects
The damping ratio of chassis suspension is a key parameter for damping matching of in-wheel motor vehicles (IWMVs). Because the motor is attached to the driving wheel, the initial design method of the damping ratio for traditional cars is not entirely suitable for IWMVs. This paper proposes an innovative initial design method of the damping ratio for IWMVs. Firstly, a traveling vibration model ...
متن کاملتعیین پاسخ سکوهای نیمه مغروق در برابر امواج خطی به روش تقریبی
Development of a simple fast-solving method based on the popular Morrison approach for prediction of semi-submersibles' motion response is the main purpose of the current research. The oblique seas' hydrodynamic specifications are modeled using small amplitude wave theory. The velocity forces and moments have been shown to be small and are therefore neglected. The damping coefficients are obtai...
متن کاملTranslation Invariant Approach for Measuring Similarity of Signals
In many signal processing applications, an appropriate measure to compare two signals plays a fundamental role in both implementing the algorithm and evaluating its performance. Several techniques have been introduced in literature as similarity measures. However, the existing measures are often either impractical for some applications or they have unsatisfactory results in some other applicati...
متن کامل