Resonant-type Smooth Impact Drive Mechanism (SIDM) actuator using a bolt-clamped Langevin transducer.

نویسندگان

  • Takuma Nishimura
  • Hiroshi Hosaka
  • Takeshi Morita
چکیده

The Smooth Impact Drive Mechanism (SIDM) is a linear piezoelectric actuator that has seen practically applied to camera lens modules. Although previous SIDM actuators are easily miniaturized and enable accurate positioning, these actuators cannot actuate at high speed and cannot provide powerful driving because they are driven at an off-resonant frequency using a soft-type PZT. In the present study, we propose a resonant-type SIDM using a bolt-clamped Langevin transducer (BLT) with a hard-type PZT. The resonant-type SIDM overcomes the above-mentioned problems and high-power operation becomes possible with a very simple structure. As a result, we confirmed the operation of resonant-type SIDM by designing a bolt-clamped Langevin transducer. The properties of no-load maximum speed was 0.28m/s at driving voltages of 80V(p-p) for 44.9kHz and 48V(p-p) for 22.45kHz with a pre-load of 3.1N.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A miniaturized resonant-type smooth impact drive mechanism actuator

A smooth impact drive mechanism (SIDM) is one type of piezoelectric actuator that has been put into practical use. In previous SIDMs, soft-type multilayered piezoelectric elements with low mechanical quality factors were utilized, which meant it was difficult to generate high output power, and the multilayered structure was an obstacle to further miniaturization. We have proposed a resonant-typ...

متن کامل

Measurement of the Length of Installed Rock Bolt Based on Stress Wave Reflection by Using a Giant Magnetostrictive (GMS) Actuator and a PZT Sensor

Rock bolts, as a type of reinforcing element, are widely adopted in underground excavations and civil engineering structures. Given the importance of rock bolts, the research outlined in this paper attempts to develop a portable non-destructive evaluation method for assessing the length of installed rock bolts for inspection purposes. Traditionally, piezoelectric elements or hammer impacts were...

متن کامل

Development and Control of Xy Stage with a Hybrid Bolt Clamped Langevin Type Ultrasonic Motor

The development and control of XY stage driven by ultrasonic linear motor is presented. In this paper, the stage is driven by the hybrid-bolt clamped Langevin-type (Hybrid BLT) ultrasonic motor which consists of a longitudinal and a lateral PZT. The hybrid BLT is excited by its matched natural frequency without a discordance between natural frequency of a 3rd longitudinal mode and a 6th lateral...

متن کامل

Monitoring of Pre-Load on Rock Bolt Using Piezoceramic-Transducer Enabled Time Reversal Method

Rock bolts ensure structural stability for tunnels and many other underground structures. The pre-load on a rock bolt plays an important role in the structural reinforcement and it is vital to monitor the pre-load status of rock bolts. In this paper, a rock bolt pre-load monitoring method based on the piezoceramic enabled time reversal method is proposed. A lead zirconate titanate (PZT) patch t...

متن کامل

An Ultrasonic Suction Pump with No Physically Moving Parts

A new ultrasonic suction pump is described in this paper. The pump uses suction force of the rigid cylinder tube vibrating at an ultrasonic frequency and has no physically moving parts. The pump is consists of a longitudinal bolt-clamped Langevin transducer (BLT) combined with a stepped horn working at its resonance frequency of 24 kHz. A glass tube of the half-wavelength-resonance length is gl...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Ultrasonics

دوره 52 1  شماره 

صفحات  -

تاریخ انتشار 2012