An Ultrasonic Sensor for Process Modeling and Proces Control of Ceramic Superconductors
ثبت نشده
چکیده
This research demonstrates the feasibility of utilizing nondestructive ultrasonic sensors to monitor the effects of oxygen content, processing time and temperature on the resultant mechanical, structural, and electrical properties of high temperature ceramic superconductors. Ultrasonic velocity changes, as a function of processing time and temperature, have clearly been shown to indicate the transformation between orthorhombic and tetragonal phases in Y-Ba-Cu-0.
منابع مشابه
Uncertainty Measurement for Ultrasonic Sensor Fusion Using Generalized Aggregated Uncertainty Measure 1
In this paper, target differentiation based on pattern of data which are obtained by a set of two ultrasonic sensors is considered. A neural network based target classifier is applied to these data to categorize the data of each sensor. Then the results are fused together by Dempster–Shafer theory (DST) and Dezert–Smarandache theory (DSmT) to make final decision. The Generalized Aggregated Unce...
متن کاملQuenching Effect on the Pb-Substituted Bi-Based Bulk Ceramic Superconductors
The effect of cooling process for the synthesis and the superconductivity properties of Pb-substituted Bi-based materials, has been investigated. The preparation condition for the formation of (2,2,2,3) phase has been examined. The influence of thermal condition of the synthesis and quenching on the critical temperature and the content of 110K phase was investigated. Results of the ac-susceptib...
متن کاملDevelopment of Design and Manufacturing Support Tool for Optimization of Ultrasonic Machining (USM) and Rotary USM
Ultrasonic machining (USM) is a mechanical material removal process used to erode holes and cavities in hard or brittle work pieces by using shaped tools, high-frequency and an abrasive slurry. This paper addresses the concept and development of an expert system (ES) for hard and brittle material, such as glass, quartz, diamond, carbides, semi conducting materials, ceramic and graphite which ca...
متن کاملDevelopment of Design and Manufacturing Support Tool for Optimization of Ultrasonic Machining (USM) and Rotary USM
Ultrasonic machining (USM) is a mechanical material removal process used to erode holes and cavities in hard or brittle work pieces by using shaped tools, high-frequency and an abrasive slurry. This paper addresses the concept and development of an expert system (ES) for hard and brittle material, such as glass, quartz, diamond, carbides, semi conducting materials, ceramic and graphite which ca...
متن کاملApplication of Bare Piezoelectric Ceramics in Monitoring Resin Transfer Moulding (RTM) Process
This paper investigates application of piezoelectric ceramics mounted on surface of mould to monitor flow front and curing phases of resin in Resin Transfer Moulding (RTM) process. The piezoelectric ceramic is used for both generating ultrasound and measuring energy of echoed ultrasonic wave at the interface of mould and resin. One of the advantages of this method is that the piezoelectric cera...
متن کامل