- Bonded Aggtegates

An Investigation of Structural-Mechanical Properties of Spun-Bonded Non-Woven Using Computer Vision Method

Silica-bonded n-propyldiethylenetriamine sulfamic acid as a recyclable solid acid catalyst for the synthesis of coumarin and biscoumarin derivatives

Silica-bonded n-propyldiethylenetriamine sulfamic acid (SBPDSA) was found as an efficient solid acid for the synthesis of coumarins. Coumarin derivatives were obtained via the Pechmann condensation reaction of phenols and β-keto-esters at 80 oC under solvent-free conditions. Also, biscoumarins were obtained via the condensation of aldehydes and 4-hydroxycoumarin in water at reflux conditions. T...

Silica-bonded n-propyltriethylene-tetramine as a recyclable solid base catalyst for the synthesis of 2-amino-5-oxo-5,6,7,8-tetrahydro-4H-chromenes

Silica-bonded n-propyltriethylene-tetramine (SBNPTT) was found as an efficient solid base for the synthesis of 2-amino-5-oxo-5,6,7,8-tetrahydro-4H-chromenes. Chromene derivatives were obtained via the three-component condensation reaction of aromatic aldehydes, malononitrile, and dimedone at 80 oC under solvent-free conditions. The heterogeneous solid base showed much the same efficiency when u...

Improvement of Collapsibility of Sodium Silicate Bonded Cores for Aluminium Casting

This paper examines the compressive strength of sodium silicate bonded cores for aluminum casting with different additives. Various materials are used as additives among which it is found that 5% sand size bauxite has the best effect on both gas strength and de-coring 98.5% silica content sand with 70-90 AFS No. with 4% sodium silicate is used. The results indicate that although very good colla...

On the microstrctral and machanical properties of similar TLP bonding of Inconel 600 superalloy sheet

In this study, microstructural evaluation and mechanical properties of similar TLP bonded of Inconel 600 by using of BNi-2 interlayer were investigated. The bonding tests were carried out at 1050°C and 1100°C for 5-45 min which homogenization treatment was performed on the best of the bonded samples. Results showed that Ni-B eutectic compound was formed in the a-thermally solidification zone (A...