Intelligent Control of Air Compressor Production Process

نویسندگان

  • Gongfa Li
  • Yuesheng Gu
  • Jianyi Kong
  • Guozhang Jiang
  • Liangxi Xie
  • Zehao Wu
چکیده

The air compressor provides not only the required pressure air for the cooling equipment and refrigeration plant, but also the raw material required for the air separation plant. Utilizing the air compressor is extremely extensive in many significant departments such as the metallurgy, oil and chemical industry. The air compressor production process is a time-varying, delay and nonlinear complex system and gas consumption in the industrial field is irregular. Defects in the traditional control method lead to the pressure instability of the compressed air outputted from the air compressor in volatile gas-consumption situations, sometimes a wide range of fluctuation arising. Therefore, the working state of the air compressor becomes unstable. It results in both a waste of resources and greater energy consumption. Therefore, guaranteeing the output pressure of the air compressor system steady is extraordinarily significant for improving efficiency and saving energy for the overall air separation system. DCS control technology applied to the system, the ECS-700 system of SUPCON was utilized into configuring the air compressor system and monitoring real-time values of important parameters in the various components. According to the working characteristics of the air compressor system, a fuzzy pressure controller and an intelligent control method based on the fuzzy PID were proposed. The simulation results showed that the control effect was extraordinarily satisfactory and effective. It can offer a certain meaning of guidance and reference for the control of other equipment in air separation systems.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design of the Fuzzy Intelligent Controller of Air Compressor

The air compressor plays an extremely important role in the production of air separation. It provides the required specifications of compressed air for the follow-up air separation processes. It is difficult for an air compressor system to achieve the on-site production requirements because it is a time-varying, delay and nonlinear complex system. Articles for air compressor control system desi...

متن کامل

Research of Intelligent Control of Air Compressor at Constant Pressure

The air separation plays an extremely important role in the development of metallurgical industry. And the air compressor which provides not only the required pressure air for the cooling equipment and refrigeration plant but also the raw material required for the separation plant is a key device in the air separation plant. Utilization of the air compressor is extremely extensive in many signi...

متن کامل

Evaluation of Damage Problems in the Water Pump Components of an Air Compressor Cooling System: a Case Study

In this paper, the reasons of damage water pumps parts of the air compressor cooling system were studied. To reach this goal, the works like preparing metallographic samples, evaluation of structure, investigation of mechanical properties, the alloy parts detection and chemical analysis of deposit and corrosion products collected from the parts were performed. According to studies and results o...

متن کامل

A Hermetic Scroll Compressor For Application To High Heat Of Compression Gases

A horizontal hermetic scroll compressor has been developed for applications with high heatof-compression gases, including natural gas, air and helium (cryogenics). The compressor is a low profile horizontal design with oil-flooded cooling of the compression process. Combined with components required for oil separation and cooling, this design provides a smooth, continuous compression process fe...

متن کامل

Evaluation of Damage Problems in the Water Pump Components of an Air Compressor Cooling System: a Case Study

In this paper, the reasons of damage water pumps parts of the air compressor cooling system were studied. To reach this goal, the works like preparing metallographic samples, evaluation of structure, investigation of mechanical properties, the alloy parts detection and chemical analysis of deposit and corrosion products collected from the parts were performed. According to studies and results o...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013