Linear dimensional change, compressive strength and detail reproduction in type IV dental stone dried at room temperature and in a microwave oven
نویسندگان
چکیده
UNLABELLED The type IV dental stone is widely used for the fabrication of dyes and master casts for fixed and removable partial prostheses. It is typically normal to wait at least 24 hours for the casts to dry prior to beginning the laboratory procedures. The waiting time has been shown to be greatly reduced by using microwave drying. OBJECTIVE This study evaluated the influence of drying techniques at room temperature and microwave oven on the linear dimensional change, compressive strength and detail reproduction in type IV dental stones. MATERIAL AND METHODS Three type IV dental stone brands were selected; elite Rock, Shera Premium and Durone IV. Two different drying protocols were tested in 4 groups (n=10); G-room temperature (25±4 ºC) dried for 2 hours; G2--room temperature dried for 24 hours; G3-room temperature dried for 7 days and G4--microwave oven dried at 800 W for 5 minutes and after 2 hours at room temperature. After drying, the samples were assayed for dimensional charges. The sample surface was submitted to the ImageTool 3.0 software for compressive strength in a universal testing machine with a cell load of 50 KN at a crosshead speed of 0.5 mm/minutes and the detail reproduction was analyzed with a stereomicroscope at 25x magnification. The statistical analysis of the linear dimensional change and compressive strength data were conducted by the ANOVA test followed by the Tukey test (p<0.05). Detailed reproduction values were reported in percentages. RESULTS For the compressive strength test, Elite Rock and Durone IV did not present significant differences between G2 and G4, while Shera Premium did not present differences between G3 and G4. The best reproduction levels were observed for G3. CONCLUSIONS Dental stone microwave oven drying showed a linear dimensional change similar to after room temperature drying for 24 hours and 7 days. The compressive strength of the stone dried in the microwave oven was similar to those dried at room temperature for 24 hours, with the exception of Shera Premium, which had similar results for microwave and room temperature drying for 7 days. For the microwave drying method the detail reproduction levels for samples dried at room temperature for 24 hours and 7 days were similar, except for the Durone IV.
منابع مشابه
Evaluation of dimensional changes and detail reproduction of three type IV dental gypsums
Background and Aims: Gypsum products are used for several different purposes. Adaptation and success of casting restorations are dependent on dimensional accuracy, strength, and reproduction of details of dental gypsums. This study was designed to evaluate the dimensional changes and accurate details reproduction of three type IV dental gypsums. Materials and Methods: 60 samples in 3 groups of...
متن کاملاثر دما, رطوبت و زمان بر تغییرات ابعادی گچ نوع IV
Statement of Problem: Different temperature and moisture around Iran and wide usage of stone type IV in dental laboratories in our country were the reasons for us for doing this study. Purpose: In this survey the effect of temperature, moisture and time on dimensional change of dental stone type IV (Velmix) were investigated. Materials and Methods: In this experimental study cube shape Metal mo...
متن کاملEffect of Microwave Disinfection on Compressive and Tensile Strengths of Dental Stones
BACKGROUND AND AIMS Although microwave irradiation has been used for disinfection of dental stone casts, there are concerns regarding mechanical damage to casts during the process. The aim of this study was to evaluate the effect of microwave irradiation on the compressive strength (CS) and diametral tensile strength (DTS) of stone casts. MATERIALS AND METHODS In this in vitro study, 80 cylin...
متن کاملHardness and Surface Detail Reproduction of Gypsum Casts Retrieved from Addition Silicone Impressions Disinfected for Different Time Points
Background and Aim: Bacterial colonization occurs following contamination of impression materials with blood and saliva. However, not all disinfecting agents are compatible with the impression materials and may cause changes in the resultant casts. The purpose of this study was to assess the impact of various immersion time of addi-tion silicon impressions in different disinfecting solutions on...
متن کاملComparative Study of Alkali-Activated Fly Ash Manufactured Under Pulsed Microwave Curing and Thermal Oven Curing
This paper compares the alkali-activated fly ash (AAFA) manufactured with thermal oven curing and pulsed microwave curing methods. Fly ash activated by 8M NaOH solution at a liquid to solid ratio of 0.3 was cured by thermal oven at 85°C and domestic microwave oven, respectively. Apart from compressive strength test, the temperature profiles of AAFA samples were captured by thermal camera. React...
متن کامل