Fixed Order Pq-control Design Method for Dual-stage Instrumented Suspension
نویسندگان
چکیده
To achieve frequency separation between actuators of a dual-stage servo actuator system in a hard disk drive, the PQ control design method can be used. In the PQ method, the servo controller is designed by focusing on structural interference of the actuators. This paper provides a specific parametrization for fixed order feedback controllers used in the PQ-method for which the structural interference between actuators can be minimized. The proposed control design method is applied to a dual-stage instrumented suspension, where the additional sensor of the instrumented suspension is used to attenuate high frequency disturbance caused by windage turbulence in a hard disk drive. Copyright c © 2005 IFAC.
منابع مشابه
Control Design for a Piezo-Electric Dual-Stage Instrumented Suspension
The servo control design for a piezo-electric dual-stage instrumented suspension to achieve windage vibration reduction for high track density recording is presented in this paper. The servo design exploits the information available from both the sampled position error signal (PES) and a continuous time instrumented suspension signal (ISS) available from an instrumented suspension. The ISS from...
متن کاملDesign and Analysis of Computer Disk Drive Suspension Vibration Compensation Control
Based on the existing dual-stage control scheme for hard disk drives, this paper focuses on the design and analysis of adaptive feedforward control of airflow induced suspension vibration, which utilizes the vibration signal obtained from instrumented suspension. In this scheme, a strain signal on the surface of the instrumented suspension is obtained which is indicative of the suspension’s vib...
متن کاملTrack-Following Control with Active Vibration Damping of a PZT-Actuated Suspension Dual-Stage Servo System
This paper discusses the controller design of a PZTactuated suspension dual-stage servo system in hard disk drives. The proposed control structure includes an active vibration damping control loop and a trackfollowing control loop. The vibration damping control loop, which runs at a faster rate than the trackfollowing control loop, utilizes a PZT element on a PZT-actuated suspension as a vibrat...
متن کاملA New Fuzzy Sliding Mode Controller with Auto-Adjustable Saturation Boundary Layers Implemented on Vehicle Suspension
This study develops a fuzzy sliding mode controller (FSMC) based on a variable boundary layer. A fuzzy inference mechanism is used to on-line tune the thickness of the boundary layers of the controller. Minimum rule base has been used for the fuzzy inference system which results in low calculation effort. The aim of this paper is to design a controller which will eliminate the chattering of FSM...
متن کاملRobust Track-Following for Dual-Stage Servo Systems by Sensitivity Shaping with Degree Constraint
This paper presents track-following control design, with a new sensitivity shaping technique, for dual-stage servo systems in hard disk drives. The shaping technique simultaneously takes care of both complexity of controllers and robustness, important issues for controller implementation. As dual-stage servo systems, in addition to the conventional voice coil motor, a microactuator at the slide...
متن کامل