Mechanical Analysis of Tubing String in Fracturing Operation
نویسندگان
چکیده
The method of fracturing of oil gas reservoir is considered as an instrumental one for maximizing the yield. Multiple loads in a well fracturing operation may compel tubing string to yield, break and/buckle in a permanent spiral, leading to severe financial deficit. Mathematical models for mechanical analysis of fracturing string in whole fracturing operation are developed on the basis of operation procedures of well fracturing, with full consideration of well trajectory, component of fracturing string, borehole fluid property, internal and external pressure, friction factor between fracturing string and well wall, tubing temperature, packer types, piston effect of packer, helical buckling effect of tubing, slip joint, etc.. These mathematical models are solved with differential methods, obtaining parameters such as tension force, torque, stress, safety factor, stability, and elongation etc. Strength calibration of the string is formed. Software for mechanical analysis of tubing string in fracturing operation is developed with Visual Basic 2008. A case study of field application is also provided.
منابع مشابه
Recent Advances in Hydraulic Fracturing for Enhanced Well Productivity: State of the Art Report
Hydraulic fracturing of horizontal wells is considered as the main reason for the phenomenal increase in production of oil and gas from marginal and unconventional reservoirs in North America. The process evolution started more than a decade ago and has resulted in ultra-low permeability reservoirs producing at close to the same rates as some of the very prolific reservoirs in the Middle East,...
متن کاملThe Analytic Technique and Experimental Research Methods of Post-buckling about Slender Rod Strings in Wellbore
The buckling behavior of rod strings in wellbore is one of the key issues in petroleum engineering. The slender rod strings in vertical wellbore were selected as research objects. Based on the energy method, the critical load formulas of sinusoidal and helical buckling were derived for the string with the bottom of the wellbore pressure. According to the sinusoidal and helical buckling’s geomet...
متن کاملThe effect of sufficient barrier layers on hydraulic fracturing design efficiency in one of the Iranian South hydrocarbon reservoirs
Hydraulic fracturing and matrix stimulation are two major methods of the reservoir stimulation. Hydraulic fracturing, which is the newest technique and technically more complex, is very useful in low permeability reservoirs. Although it has been used widely in hydrocarbon production wells, it is a new method in Iran. In this paper, the effect of sufficient barrier layers on hydraulic fracturing...
متن کاملNumerical Evaluation of Hydraulic Fracturing Pressure in a Two-Phase Porous Medium
Hydraulic fracturing is a phenomenon in which cracks propagate through the porous medium due to high pore fluid pressure. Hydraulic fracturing appears in different engineering disciplines either as a destructive phenomenon or as a useful technique. Modeling of this phenomenon in isothermal condition requires analysis of soil deformation, crack and pore fluid pressure interactions. In this paper...
متن کاملHydraulic Fracturing Length Optimization and its Impact on the Reservoir Performance
Hydraulic fracturing is one of the most common methods of well stimulation for reservoirs with low permeability. Hydraulic fracturing increases the flow capacity, alters flow geometry, bypasses damage and improves recovery factor. The pressure of most of Iranian oil reservoirs is declined and consequently the production is reduced. It is necessary to improve the production by using new stimulat...
متن کامل