Finite-element simulation of cooling of realistic 3-D human head and neck.
نویسندگان
چکیده
Rapid cooling of the brain in the first minutes following the onset of cerebral ischemia is a potentially attractive preservation method. This computer modeling study was undertaken to examine brain-cooling profiles in response to various external cooling methods and protocols, in order to guide the development of cooling devices suitable for deployment on emergency medical vehicles. The criterion of successful cooling is taken to be the attainment of a 33 degrees C average brain temperature within 30 min of treatment. The transient cooling of an anatomically correct realistic 3-D head and neck with realistically varying local tissue properties was numerically simulated using the finite-element method (FEM). The simulations performed in this study consider ice packs applied to head and neck as well as using a head-cooling helmet. However, it was found that neither of these cooling approaches satisfies the 33 degrees C temperature within 30 min. This central conclusion of insubstantial cooling is supported by the modest enhancements reported in experimental investigations of externally applied cooling. The key problem is overcoming the protective effect of warm blood perfusion, which reaches the brain via the uncooled carotid arterial supply and effectively blocks the external cooling wave from advancing to the core of the brain. The results show that substantial cooling could be achieved in conjunction with neck cooling if the blood speed in the carotid artery is reduced from normal by a factor of 10. The results suggest that additional cooling means should be explored, such as cooling of other pertinent parts of the human anatomy.
منابع مشابه
Modeling Time Resolved Light Propagation Inside a Realistic Human Head Model
Background: Near infrared spectroscopy imaging is one of the new techniques used for investigating structural and functionality of different body tissues. This is done by injecting light into the medium and measuring the photon intensity at the surface of the tissue.Method: In this paper the different medical applications, various imaging and simulation techniques of NIRS imaging is described. ...
متن کاملQuantitative Comparison of Analytical solution and Finite Element Method for investigation of Near-Infrared Light Propagation in Brain Tissue Model
Introduction: Functional Near-Infrared Spectroscopy (fNIRS) is an imaging method in which light source and detector are installed on the head; consequently, re-emission of light from human skin contains information about cerebral hemodynamic alteration. The spatial probability distribution profile of photons penetrating tissue at a source spot, scattering into the tissue, and being released at ...
متن کاملFinite element simulation of the clinching process of steel sheets and study on influence of anisotropy on the mechanical behavior of joint
This article describes a numerical study on the TOX-clinching process of the steel sheets. In addition, the influence of plastic anisotropy of the material on joining parameters is analyzed by evolution of the joint parameters such as undercut and neck thickness and punch force-displacement curve. Finite element analysis with ABAQUS/CAE-Explicit program is used to simulate two dimensional and t...
متن کاملDynamic Characteristics of the Skull with the Neck Effect
The human head is a combination of the variety of different tissues of the skull, brain, cerebellar, brainstem, cerebrospinal fluid (CSF), and neck bone, etc. The differences of both skull and neck bone combined reaction and pure skull reaction are discussed in the analysis. Finite element method (FEM) is employed not only to analyze the natural vibration modes but also to understand the reacti...
متن کاملFinite element modeling of the human head under baton impact
Purpose: This research will try to predict damage probability and calculate the main stress resulted from baton impacts by finite element (FE) modeling of the human head considering skull texture, brain and cerebrospinal fluid.Materials and Methods: A three dimensional FE model of the skull-brain complex was constructed for simulating the baton impact. The FE analysis was carried out using ANSY...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of biomechanical engineering
دوره 125 6 شماره
صفحات -
تاریخ انتشار 2003