The use of Stokes deformation number as a predictive tool for material exchange behaviour of granules in the 'equilibrium phase' in high shear granulation.
نویسندگان
چکیده
The objective of this study was three-fold; to investigate the different mechanisms of material exchange during the equilibrium phase of the granulation process and whether these mechanisms are consistent with the mechanisms described in the growth regime map, to study how material properties and process conditions affect these exchange mechanisms, and to correlate Stokes deformation number to the exchange mechanisms. Microcrystalline cellulose (MCC), alpha-lactose, microfine cellulose (MFC), and dextrin were granulated using water as a binding agent. Once in the equilibrium phase, 5% (w/w) of the granular mass was replaced with wet tracer granules, after which the granulation process was continued. Granules were typically of a size of approximately 1mm in diameter. Therefore, these granules can also be called pellets. Tracer experiments show indeed solid material exchange can take place in the equilibrium phase of the high shear granulation process. Tracer material was equally dispersed throughout the whole batch for all materials tested. However, the granulation time needed to reach this homogeneous distribution varied with material and granulation conditions. Three different mechanisms of material exchange were identified: exchange by disintegration, where granules are rapidly crushed and formed to granules again; exchange by deformation, where abraded granule fragments immediately fuse with other granules; and exchange by distribution, where there is a prolonged period over which both tracer and standard granules stay intact, followed by uncontrolled growth and exchange of material. It was found that it is possible to shift between the mechanisms by changing the process conditions, e.g., changing viscosity or amount of binder liquid. These observations indicate that by choosing the appropriate process conditions improved distribution of small amounts of insoluble materials in the granules can be obtained. A relation exists between the exchange mechanisms and the growth regime map: the disintegration mechanism resembles 'crumb behaviour', the deformation mechanism resembles 'steady growth', and the distribution mechanism resembles 'nucleation' and 'induction growth'. Unfortunately, Stokes deformation number cannot be used as a predictive tool when low viscosity binders like water are used, due to the importance of viscosity in the equation. However, this number is one of the variables of the growth regime map. Since the exchange mechanisms correspond to the granule growth mechanisms in the regime map, alternatively colour experiments might be used to reveal the granulation regime.
منابع مشابه
SEISMIC OPTIMIZATION OF STEEL SHEAR WALL USING SHAPE MEMORY ALLOY
Nowadays, steel shear walls are used as efficient lateral-load-resistant systems due to their high lateral stiffness and carrying capacity. In this paper, the effect of substituting a shape memory alloy (SMA) material is investigated instead of using conventional steel in the shear wall. A numerical study is conducted using finite element method (FEM) by OpenSees software. For this purpose, at ...
متن کاملFinite element simulation of pyroplastic deformation, anisotropic shrinkage and heterogeneous densification for ceramic materials during liquid phase sintering process
Pyroplastic deformation is a distortion of the ceramic shape during the sintering process. It occurs because the flow of the vitreous phase at high temperature and the applied stress due to the weight of the product during sintering process. The aim of this paper deals with describing a numerical-experimental method to evaluate the pyroplastic deformation, to predict the anisotropic shrinkage a...
متن کاملA refined inverse hyperbolic shear deformation theory for bending analysis of functionally graded porous plates
The modern engineering structures require the advanced engineering materials to resist the high temperatures and to provide high stiffness. In particular the functionally graded porous materials (FGPMs) introduced are expected to have these desired properties, consequently eliminating local stress concentration and de-lamination. In the present paper, a new shear strains shape function is chose...
متن کاملExperimental Studies on the Effects of Process Parameters on Granule Properties in a Conical High Shear Granulator
Experimental work was carried out to investigate the influence of impeller speed, granulation time, binder mass and their interactions on granule size distribution, mean size and binder content distribution in a conical high shear granulator. It was observed that the response of high shear granulation to changes in process parameters varies significantly from one operating condition to anot...
متن کاملEvaluation of the effect of granulation processing parameters on the granule properties: Lactose- Cornstarch case study
Understanding the relationship between processing parameters of fluidized bed wet granulation and the characteristics of intermediate and final products is crucial in the pharmaceutical processes. This research examined a fluidized bed wet granulation process containing a cornstarch solution as binder and lactose particles as powder. The design of experiment (DoE) was performed according to an ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- International journal of pharmaceutics
دوره 318 1-2 شماره
صفحات -
تاریخ انتشار 2006