Modulation transfer function for infrared reflectarrays.
نویسندگان
چکیده
The quality of the image produced by optical reflectarrays as a function of the F/#, polarization, and wavelength is analyzed in this paper. The results are expressed as monochromatic and polychromatic modulation transfer functions. They show that large aperture multilevel reflectarrays perform quite close to the diffraction-limited case. The chromatic aberrations make these elements highly wavelength-selective.
منابع مشابه
Analytical Investigation of Frequency Behavior in Tunnel Injection Quantum Dot VCSEL
The frequency behavior of the tunnel injection quantum dot vertical cavitysurface emitting laser (TIQD-VCSEL) is investigated by using an analyticalnumericalmethod on the modulation transfer function. The function is based on therate equations and is decomposed into components related to different energy levelsinside the quantum dot and injection well. In this way, the effect of the tunnelingpr...
متن کاملInvestigation of the Spatial Resolution of MR-Based Polymer Gel Dosimetry versus Film Densitometry using Dose Modulation Transfer Function
Introduction: The conventional methods of dosimetry are not capable of dosimetry in such a small volume of less than one cubic millimeter. Although the polymer gel dosimetry method based on magnetic resonance imaging (MRI) could achieve three dimensional dosimetry with high resolution, a spatial resolution evaluation based on gel dose modulation transfer function has not been investigated yet. ...
متن کاملDesign and Fabrication Process of MTF Phantom CT Scan
Introduction: One of the main steps in the optimization process in diagnostic imaging is the quality control of radiology devices. The usual method of CT scan calibration is used of a phantom. The phantom created a certain weakening for the radiation through which it passes. One of the most suitable methods for quantitative analysis of the resolution and contrast in CT scan im...
متن کاملReflectivity of Reflectarrays Based on Dielectric Substrates
Problem statement: Reflectarrays provide a low cost and low profile solution for antennas required for high gain applications but their use is restricted in some applications due to the narrow bandwidth and high loss performance. These performance limitations can be attributed to different sources of reflectivity of the reflectarrays. This work provides a thorough investigation on the reflectiv...
متن کاملFusing electro-optic and infrared signals for high resolution night images
Electro-optic (EO) images exhibit the properties of high resolution and low noise level, while it is a challenge to distinguish objects at night through infrared (IR) images, especially for objects with a similar temperature. Therefore, we will propose a novel framework of IR image enhancement based on the information (e.g., edge) from EO images, which will result in high resolution IR images a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Applied optics
دوره 50 27 شماره
صفحات -
تاریخ انتشار 2011