Three-dimensional thermal noise imaging
نویسندگان
چکیده
We present a scanning probe microscope based on optical tweezers for three-dimensional imaging of the topology of transparent material in the nanometer range. A spherical nanoparticle serves as a probe. An optical trap moves it through the sample ~e.g., a polymer network!, while the position of the particle center is recorded by three-dimensional interferometry. Accessible volumes are reconstructed from the histogram of thermal position fluctuations of the particle. The resolution in determining the position of surfaces in three dimensions is about 20 nm. © 2001 American Institute of Physics. @DOI: 10.1063/1.1423404#
منابع مشابه
Optimization of Imaging Parameters in Micro-CT Scanner Based On Signal-To-Noise Ratio for the Analysis of Urinary Stone Composition
Introduction: Micro-CT scanner with a resolution of about 5 micrometers is one of the modalities used to create three-dimensional/two-dimensional images of urinary stones. This study aimed to optimize imaging parameters in micro-computed tomography (CT) scanner based on the signal-to-noise ratio (SNR) of urinary stones for the analysis of stone composition. <stro...
متن کاملEvaluation of Intrauterine Structural Pathology by Three-Dimensional Sonohysterography Using An Extended Imaging Method
متن کامل
Investigation of dosimetric characteristic of NIPAM polymer gel using x-ray CT
Introduction: Polymer gel dosimeters contain chemical materials sensitive to the radiation which are polymerized by the radiation as a function of absorbed dose. So information of spatial dose distribution can be extracted by imaging from irradiated gel. Among imaging techniques, computed tomography (CT) poses as an attractive method because of practical advantages such as acce...
متن کاملDeveloping 3 dimensional model for estimation of acoustic power in urban pathways in geo-spatial information system framework
Around the word, traffic growth is causing growing air and noise pollution. Noise levels in a given area are affected by traffic on the streets as well as effective factors, including existing infrastructure and industrial centers, and so on. The purpose of this research is to model and estimate the amount of acoustic emission in the streets of Tehran's third district, using the 3D spatial info...
متن کاملThermal Modeling and Device Noise Properties of Three-Dimensional–SOI Technology
Thermal test structures and ring oscillators (ROs) are fabricated in 0.18-μm three-dimensional (3-D)–SOI technology. Measurements and electrothermal simulations show that thermal and parasitic effects due to 3-D packaging have a significant impact on circuit performance. A physical thermal model is parameterized to provide better prediction of circuit performance in 3-D technologies. Electrothe...
متن کامل