Measurement of elastic moduli of porous SiC/SiC ceramic matrix composites using ultrasonics
نویسنده
چکیده
Forced Chemical Vapor Infiltration (FCVI) method was used in fabricating the Nicalon TM!Silicon Carbide composites. Both through-thickness and In-plane (fiber fabric plane) moduli were determined using ultrasonic techniques. The through-thickness moduli were found to be much less than the inplane moduli. Both in-plane and through-thickness moduli were significantly decreased with an increased porosity. The experimental results for the moduli were found to be in good agreement with a theoretical model.
منابع مشابه
Microstructure of 3d Textile C/pyc/sic Composites Prepared by Chemical Vapor Infiltration
Ceramic matrix composites (CMCs) is one of the most promising candidates for high temperature structural material, in which SiC matrix exhibits an excellent oxidation resistance because of the formation of a protective layer of silica which limits further oxidation [1]. CMCs with continuous fibers exhibit attractive properties such as low densities, high elastic moduli, and high strengths at el...
متن کاملTribological behaviour of AA 5083/Micron and Nano SiC composites fabricated by ultrasonic assisted stir casting process
Metal Matrix composites (MMCs) are light weight, high-strength materials with potential application in areas such as automobile, aerospace, defence and other industries. MMCs are projected to significantly reduce the overall weight of the vehicle and aircraft while maintaining satisfactory structural strength. Micron and Nano-sized ceramic particle reinforced aluminum matrix composites fabricat...
متن کاملThe Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites
In this research, the SiC-matrix composite with different amounts of TiC (0, 2.5, 5, 7.5, and 10 wt%) supplemented with additives including 4.3 wt% Al2O3 and 5.7 wt% Y2O3 were utilized to initiate the required liquid phase. The sintering process was performed using pressureless sintering at 1900 °C for 1.5 hours under argon atmosphere. The compos...
متن کاملAdvanced Radiation-Resistant Ceramic Composites
Ceramic matrix composites (CMC’s), particularly silicon carbide (SiC) fiber-reinforced SiC-matrix (SiC/SiC) composites, have been studied for advanced nuclear energy applications for more than a decade. The perceived potentials for advanced SiC/SiC composites include the ability to operate at temperature regimes much higher than heat-resistant alloys, the inherent low inducedactivation nuclear ...
متن کاملComparison of Cyclic Hysteresis Behavior between Cross-Ply C/SiC and SiC/SiC Ceramic-Matrix Composites
In this paper, the comparison of cyclic hysteresis behavior between cross-ply C/SiC and SiC/SiC ceramic-matrix composites (CMCs) has been investigated. The interface slip between fibers and the matrix existed in the matrix cracking mode 3 and mode 5, in which matrix cracking and interface debonding occurred in the 0° plies are considered as the major reason for hysteresis loops of cross-ply CMC...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015