A capon beamforming method for clutter suppression in colocated compressive sensing based MIMO radars
نویسندگان
چکیده
Compressive sensing (CS) based multi-input multi-output (MIMO) radar systems that explore the sparsity of targets in the target space enable either the same localization performance as traditional methods but with significantly fewer measurements, or significantly improved performance with the same number of measurements. However, the enabling assumption, i.e., the target sparsity, diminishes in the presence of clutter, since clutters is highly correlated with the desire target echoes. This paper proposes an approach to suppress clutter in the context of CS MIMO radars. Assuming that the clutter covariance is known, Capon beamforming is applied at the fusion center on compressively obtained data, which are forwarded by the receive antennas. Subsequently, the target is estimated using CS theory, by exploiting the sparsity of the beamformed signals.
منابع مشابه
Fast Implementation of Transmit Beamforming for Colocated MIMO Radar
Multiple-input Multiple-output (MIMO) radars benefit from spatial and waveform diversities to improve the performance potential. Phased array radars transmit scaled versions of a single waveform thereby limiting the transmit degrees of freedom to one. However MIMO radars transmit diverse waveforms from different transmit array elements thereby increasing the degrees of freedom to form flexible ...
متن کاملSignal Model and Moving Target Detection Based on Mimo Synthetic Aperture Radar
Recent years, a new SAR concept based on Multi-Input Multi-Output (MIMO) configuration has demonstrated the potential advantages to simultaneously improve the performance of Synthetic Aperture Radar (SAR) imaging and ground moving target detection by utilizing multiple antennas both at transmission and reception. However, the precise signal model, as well as the effect of ground moving target i...
متن کاملPower Allocation and Measurement Matrix Design for Block CS-Based Distributed MIMO Radars
—Multiple-input multiple-output (MIMO) radars offer higher resolution, better target detection, and more accurate target parameter estimation. Due to the sparsity of the targets in space-velocity domain, we can exploit Compressive Sensing (CS) to improve the performance of MIMO radars when the sampling rate is much less than the Nyquist rate. In distributed MIMO radars, block CS methods can be ...
متن کاملTarget parameter estimation for spatial and temporal formulations in MIMO radars using compressive sensing
Conventional algorithms used for parameter estimation in colocated multiple-input-multiple-output (MIMO) radars require the inversion of the covariance matrix of the received spatial samples. In these algorithms, the number of received snapshots should be at least equal to the size of the covariance matrix. For large size MIMO antenna arrays, the inversion of the covariance matrix becomes compu...
متن کاملAdaptive Array Processing for Multi-mission Phased Array Radar
As the use of phased array radars becomes more established for weather surveillance, adaptive array processing techniques will become more important to the weather radar community. Such techniques can be applied to phased array radars to improve angular resolution and also to suppress clutter compared to conventional beamforming methods. Thus, enhanced details of weather phenomena can be realiz...
متن کامل