Catalytic Membrane Reactor: Multilayer membranes elaboration
نویسندگان
چکیده
Methane conversion to syngas is very attractive for hydrogen or clean fuel production and provides an alternative to oil products. An efficient architecture for the membrane reactor is constituted of a porous support, a thin dense membrane and a catalyst layer. This work is focused on the elaboration process of such asymmetric membranes by co-sintering of at least the porous support and the dense membrane and specially the choice of well adapted materials. La0.8Sr0.2Fe0.7Ga0.3O3-δ perovskite material has been chosen as the dense membrane because it exhibits a good compromise between oxygen flux and stability. The choice of the material for the porous support is mainly oriented by the sintering behaviour of the membrane, the thermal expansion behaviour of both layers to avoid cracks formation under working conditions and the chemical inertness of both materials. Several formulations fulfilling these three requirements were synthesized by liquid phase reaction and tape-cast. A pore forming agent was added in the support tapecasting slurry in order to create a controlled porosity. Then, the porous support has been characterized in term of gas permeability and thermal expansion under working conditions.
منابع مشابه
Catalytic pervaporation membrane reactors for the integrated reaction and separation in condensation reactions
Pervaporation membrane reactors are ideal candidates to enhance conversion in reversible reactions generating water as a by-product. This equilibrium displacement can be enhanced through close integration of reaction and separation by way of catalytic membranes. In this research, catalytic hollow fibre pervaporation membranes for the close integration of reaction and separation will be develope...
متن کاملNew Polymer Catalytic Membranes for Nitrite Reduction: Experimental Assessment
In this work we report the experimental assessment of the performance of a new catalytic hollow fiber reactor with supported Pd catalyst for nitrite removal from polluted waters. The reactor configuration facilitates working at low flowrate and hydrogen concentrations in order to improve the selectivity of the reduction reaction towards nitrogen, thus, inhibiting the formation of ammonia. Pd ca...
متن کاملA Comprehensive Model for Catalytic Membrane Reactor
Catalytic membrane reactors are multifunctional reactors, which provide improved performance over conventional reactors. These are used mainly for conducting hydrogenation/ dehydrogenation reactions, and synthesis of oxyorganic compounds by using inorganic membranes. In this paper, comprehensive model has been developed for a tubular membrane reactor, which is applicable to Pd or Pd alloys memb...
متن کاملPerovskite-type Ceramic Membranes Partial Oxidation of Methane in a Catalytic Membrane Reactor Dissertation
متن کامل
Anodic aluminium oxide catalytic membranes for asymmetric epoxidation.
Catechol-functionalized (salen)Mn complexes can be supported on mesoporous anodized aluminium oxide disks to yield catalytic membranes that are highly active in the enantioselective epoxidation of olefins when being deployed in a forced-through-flow reactor.
متن کامل