Characteristics of Graphene-Filled Solderable Isotropically Conductive Adhesive (ICA)
نویسندگان
چکیده
A new class of functionalized graphene-filled solderable isotropically conductive adhesive (ICA) has been developed using a low-meltingpoint alloy (LMPA) fillers. The mechanical and electrical characteristics of formulated ICAs were investigated and compared with those of three kinds of conventional ICAs filled with Ag particles. The functionalized graphene-filled solderable ICA formed good metallurgical interconnection between upper and corresponding lower electrode. The developed ICA exhibit lower electrical resistance and higher mechanical strength compared with those of conventional ICAs. In addition, the thermal conductivity was improved about 20% by adding functionalized graphene compared with that of solderable ICA without graphene. [doi:10.2320/matertrans.M2011365]
منابع مشابه
Adhesive and Conductive – Inkjettable nano-filled inks for use in microelectronics and microsystems technology
Current technology, Inkjet is an accepted technology for dispensing small volumes of material (50 – 500 picolitres). Currently traditional metal-filled conductive adhesives cannot be processed by inkjetting (owing to their relatively high viscosity and the size of filler material particles). Smallest droplet size achievable by traditional dispensing techniques is in the range of 150 μm, yieldin...
متن کاملElectrically Conductive Adhesives
Electrically conductive adhesives are being used in electronic packaging for several decades. A brief review of the dynamic development of conductive adhesives under the influence of the miniaturization, the adaptation of environmental friendly manufacturing processes is presented. With respect to the importance of isotropically conductive adhesives (ICA), a new contact model to analyze the pri...
متن کاملScreening Life Cycle Assessment of Silver-Based Conductive Adhesive vs. Lead-Based Solder and Plating Materials
Conductive adhesives are getting growing attention in the electronics industry as they constitute an alternative to lead-free solders and conventional solders. The purpose of the present research is to compare the 10Sn90Pb solder paste to an epoxy based isotropically conductive adhesive (ICA) containing pure silver. The study is done from a life cycle perspective in Japan using input data from ...
متن کاملSupporting Information for “Critical Factors of the 3D Microstructural Formation in Hybrid Conductive Adhesive Materials by X-ray Nano-tomography”
Appendix 1-Experimental Details Preparation of the conductive adhesive tracks was accomplished by first mechanically mixing a typical thermoset type of adhesive test vehicle with a loading between 78-85 wt% of silver-plated copper to form a uniform paste. The composition is then applied onto a substrate to form conductive traces or electronic circuitry. Usual methods of applying the composition...
متن کاملGraphene oxide based conductive glue as a binder for ultracapacitor electrodes†
An adhesive and conductive glue was created by synergistic assembly of graphene oxide (GO), single walled carbon nanotubes (SWCNTs) and conjugate polymer PEDOT:PSS in aqueous solution. The GO–SWCNTs–PEDOT:PSS glue can be used as a binder to fabricate metal oxide nanoparticle based ultracapacitors. Since the functional nanoparticles are immersed in this conductive gel, uniform electrical and mec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012