Implementation of 1.5 GHz Current Reusing Low Noise Amplifier for Ultra Narrow Band Applications
نویسنده
چکیده
n this paper the Low Noise Amplifier (LNA) operating with a centre frequency of 1.5 GHz is designed using 0.25μm CMOS technology. The Designed FB-LNA uses a stagger-tuning technique. A current-reused architecture is employed to decrease the power consumption using an input common-gate stage, common-gate lownoise amplifier (CGLNA) exhibits a relatively high noise figure (NF) at low operating frequencies. The technique also enables a significant reduction in current consumption. Designed LNA can be used for narrow band receiver applications.
منابع مشابه
Design of an S-band Ultra-low-noise Amplifier with Frequency Band Switching Capability
In this paper, an ultra-low-noise amplifier with frequency band switching capability is designed, simulated and fabricated. The two frequency ranges of this amplifier consist of the 2.4 to 2.5 GHz and 3.1 GHz to 3.15 GHz frequency bands. The designed amplifier has a noise figure of less than 1dB, a minimum gain of 23 dB and a VSWR of less than 2 in the whole frequency band. The design process s...
متن کاملA New Ultra-Wideband Low Noise Amplifier With Continuous Gain Control
This paper presents a new variable gain low noise amplifier (VG-LNA) for ultra-wideband (UWB) applications. The proposed VG-LNA uses a common-source (CS) with a shunt-shunt active feedback as an input stage to realize input matching and partial noise cancelling. An output stage consists of a gain-boosted CS cascode and a gain control circuit that moves the high resonant frequency to higher freq...
متن کاملA Concurrent Dual-Band Low Noise Amplifier for GNSS Receivers
In this paper, a new design of concurrent dual-band Low Noise Amplifier (LNA) for multi-band single-channel Global Navigation Satellite System (GNSS) receivers is proposed. This new structure is able to operate concurrently at frequency of 1.2 and 1.57 GHz. Parallel and series resonance parts are employed in the input matching in order to achieve concurrent performance. With respect to used pse...
متن کاملA Broadband Low Power CMOS LNA for 3.1–10.6 GHz UWB Receivers
A new approach for designing an ultra wideband (UWB) CMOS low noise amplifier (LNA) is presented. The aim of this design is to achieve a low noise figure, reasonable power gain and low power consumption in 3.1-10.6 GHz. Also, the figure of merit (FOM) is significantly improved at 180nm technology compared to the other state-of-the-art designs. Improved π-network and T-network are used to obt...
متن کاملA 2-16 GHz CMOS Current Reuse Cascaded Ultra- wideband Low Noise Amplifier
This paper presents the design of a 2-16 GHz ultra wide band low noise amplifier (UWB LNA). The proposed LNA has a gain of 11.5 ± 0.85 dB with NF less than 2.82 dB. Good input and output impedance matching, good isolation and linearity are achieved over the operating frequency band. The proposed UWB LNA consumes 18.14 mW of power from 1.8V supply. This UWB LNA is designed and simulated in 0.18 ...
متن کامل