Model Reduction for Power Electronics Systems with Multiple Heat Sources
نویسنده
چکیده
The paper demonstrates the model order reduction procedures applied to semiconductor devices with multiple heat sources. The approach is demonstrated for a device with nine heat sources where some of them are permanently active and other work under switching conditions. For the order reduction the software package MOR for ANSYS is used, which is based on the Krylov subspace method via the Arnoldi algorithm.
منابع مشابه
The Optimal Power Flow of Multiple Energy Carriers in Networked Multi-Carrier Microgrid
The future distribution network comprising different energy carriers will include small-scale energy resources (SSERs) and loads, known as a Networked multi-carrier microgrid (NMCMG). This concept not only leads to an efficient reduction in operation costs, but also encompasses the energy transformation between gas and electric networks at combined nodes, as well as district heating networks. I...
متن کاملDetermining the Optimal Strategy of Multi Virtual Power Plants using GA-GT
abstract: In the present work, determining the optimal strategy(profit based) of multi virtual power plants (VPPs) as well as the objective of maximizing profit through the multi-level control of VPPs are discussed by the micro-grid utilization center including virtual power plants. VPPs include renewable resources such as wind farms, photovoltaic, and conventional resources such as fuel cell, ...
متن کاملHierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle
This paper presents a hierarchical control strategy for heat and electric power control of a building integrating hybrid renewable power sources including photovoltaic, fuel cell and battery energy storage with Plug-in Electric Vehicles (PEV) in smart distribution systems. Because of the controllability of fuel cell power, this power sources plays the main role for providing heat and electric p...
متن کاملMulti Objective Optimization Placement of DG Problem for Different Load Levels on Distribution Systems with Purpose Reduction Loss, Cost and Improving Voltage Profile Based on DAPSO Algorithm
Along with economic growth of countries which leads to their increased energy requirements,the problem of power quality and reliability of the networks have been more considered andin recent decades, we witnessed a noticeable growing trend of distributed generation sources(DG) in distribution networks. Occurrence of DG in distribution systems, in addition tochanging the utilization of these sys...
متن کاملA Novel Generalized Topology for Multi-level Inverter with Switched Series-parallel DC Sources (RESEARCH NOTE)
This paper presents a novel topology of single-phase multilevel inverter for low and high power applications. It consists of polarity (Level) generation circuit and H Bridge. The proposed topology can produce higher output voltage levels by connecting dc voltage sources in series and parallel. The proposed topology utilizes minimum number of power electronic devices which helps in reduction o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2006