The use of the Peak Force Quantitative Nanomechanical Mapping AFM-based method for high-resolution Young’s modulus measurement of polymers

نویسندگان

  • T. J. Young
  • M. A. Monclus
  • T. L. Burnett
  • W. R. Broughton
  • S. L. Ogin
  • P. A. Smith
چکیده

PeakForce Quantitative Nanomechanical Mapping (QNM) is a new atomic force microscopy technique for measuring the Young’s modulus of materials with high spatial resolution and surface sensitivity, by probing at the nanoscale. In the present work, modulus results from PeakForceTM QNMTM using three different probes are presented for a number of different polymers with a range of Young’s moduli that were measured independently by Instrumented (nano) Indentation Testing (IIT). The results from the diamond and silicon AFM probes were consistent and in reasonable agreement with IIT values for the majority of samples. It is concluded that the technique is complimentary to IIT; calibration requirements and potential improvements to the technique are discussed.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Atomic Force Microscope Nanoindentations to Reliably Measure the Young’s Modulus of Soft Matter

The analysis of nanomechanical properties is becoming an increasingly useful tool in a large variety of fields, ranging from biology to polymer science. The Atomic Force Microscope, AFM, can bridge the information about morphology, obtained with outstanding resolution, to local mechanical properties. When performing an AFM nanoindentation, the rough force curve, i.e. the plot of voltage output ...

متن کامل

Atomic Force Microscopy Application in Biological Research: A Review Study

Atomic force microscopy (AFM) is a three-dimensional topographic technique with a high atomic resolution to measure surface roughness. AFM is a kind of scanning probe microscope, and its near-field technique is based on the interaction between a sharp tip and the atoms of the sample surface. There are several methods and many ways to modify the tip of the AFM to investigate surface properties, ...

متن کامل

Application of Scanning Electron and Atomic Force Mode Microscopy on inscription from Proto-Elamite period in Tappeh Sofalin

The study of cultural heritage artifacts and the research of a protection and restoration intervention create with - and are often limited to - a complete characterization of their surface. This is not only factual for museum objects, but also for archaeological artifacts, because the object as it was discovered may contain precious unknown information that could be lost by too much aggressive ...

متن کامل

Nanomechanical characterization of nanostructured bainitic steel: Peak Force Microscopy and Nanoindentation with AFM

The full understanding of the deformation mechanisms in nanostructured bainite requires the local characterization of its mechanical properties, which are expected to change from one phase, bainitic ferrite, to another, austenite. This study becomes a challenging process due to the bainitic nanostructured nature and high Young's modulus. In this work, we have carried out such study by means of ...

متن کامل

High-resolution and large dynamic range nanomechanical mapping in tapping-mode atomic force microscopy.

High spatial resolution imaging of material properties is an important task for the continued development of nanomaterials and studies of biological systems. Time-varying interaction forces between the vibrating tip and the sample in a tapping-mode atomic force microscope contain detailed information about the elastic, adhesive, and dissipative response of the sample. We report real-time measur...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012