Retention of fluoride from diets containing materials produced during aluminium smelting.
نویسندگان
چکیده
1. Using male rats, the availability of fluoride from five by products of the aluminium smelting industry was tested. This was done by considering the balance between fluoride administered in controlled diets and the total fluoride content of waste products eliminated over an experimental period of 1 week. 2. Results indicated that yields of available fluoride expressed as percentage weight of original material were cryolite (Na3ALF6), 45.9%; sodium fluoride (NaF), 41.7%; aluminium fluoride (AFL3.H20), 9.1%; mist eliminator grid solids (with CaF2), 9.4%; reclaimed alumina with adsorbed F, 0.27%. 3. Of the various tissues analysed for fluoride content, only the kidney and femur showed any significant correlation with the amounts of fluoride absorbed or retained.
منابع مشابه
Aluminium salt slag characterization and utilization--a review.
Aluminium salt slag (also known as aluminium salt cake), which is produced by the secondary aluminium industry, is formed during aluminium scrap/dross melting and contains 15-30% aluminium oxide, 30-55% sodium chloride, 15-30% potassium chloride, 5-7% metallic aluminium and impurities (carbides, nitrides, sulphides and phosphides). Depending on the raw mix the amount of salt slag produced per t...
متن کاملEFFECTS OF A BATH COMPOSITION ON ALUMINIUM LOSS DURING Ti-Al ALLOY SMELTING IN A VACUUM INDUCTION FURNACE
L. Blacha, A. Smalcerz Silesian University of Technology, Faculty of Materials Engineering and Matallurgy, Katowice, Poland K. Michalek Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Ostrava, Czech Republic M. Warzecha University of Częstochowa, Faculty of Materials Processing Technology and Applied Physics, Częstochowa, Poland In the paper, results of a kinet...
متن کاملTechnology Development, Energy Consumption, Greenhouse Gases Emission and Environmental Pollution in Aluminium Industries
Aluminium is the world’s second most-used metal after steel and the aluminium production industry is the largest, in volume of metal produced, in non-ferrous metal industry. In this study, results of the material flows (country and global scales) related to the production and use of aluminium and energy consumption in 1980 to 2012 were separately analysed. Also, overview of the current status o...
متن کاملGEZA BENKE,* MICHAEL ABRAMSON and MALCOLM SIM
We reviewed specific chemical exposures and exposure assessment methods relating to published and unpublished epidemiological studies in the alumina and primary aluminium industry. Our focus was to review limitations in the current literature and make recommendations for future research. Although some of the exposures in the smelting of aluminium have been well characterised, particularly in po...
متن کاملAdsorption of Hydrogen Fluoride on Alumina
In the smelting of aluminium, HF fumes are produced that are subsequently trapped by absorption onto alumina. The factors that affect the adsorption capacity of alumina have been studied previously and are weU established, but the mechanism by which HF adsorbs onto the alumina surface is not well understood. In this study, x-ray photoelectron spectroscopy (XPS) was used to investigate the natur...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The British journal of nutrition
دوره 40 1 شماره
صفحات -
تاریخ انتشار 1978