The Triple Pendulum with Barriers and the Piston – Connecting Rod – Cranckshaft Model

نویسندگان

  • Jan Awrejcewicz
  • Grzegorz Kudra
  • J. Awrejcewicz
  • G. Kudra
چکیده

A model of a flat triple pendulum with obstacles imposed on its position is used for the modelling of a piston-connecting rod-crankshaft system of a mono-cylinder four-stroke combustion engine. The introduced selfexcited system can be only treated as the first step in more advanced modelling of real processes, but some examples of numerical simulations exhibit well known six stages of the piston sliding along the cylinder surface per cycle.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Ensuring High Reliability of Reciprocating Compressor with Ball Joint

Some reciprocating compressors have connecting rods with ball joints to join the crankshaft and the piston. The load of the pressurized gas inside the cylinder directly loads the joint of the piston and the connecting rod. For this reason, it needs to be highly reliable, so it needs to be made of hard material, high-precision spherical surfaces, and a complicated assembling line. Accordingly, t...

متن کامل

Design Analysis and Optimization of Various Parameters of Connecting Rod using CAE Softwares

The automobile engine connecting rod is a high volume production, critical component. It connects reciprocating piston to rotating crankshaft, transmitting the thrust of the piston to the crankshaft. Every vehicle that uses an internal combustion engine requires at least one connecting rod depending upon the number of cylinders in the engine. As the purpose of the connecting rod is to transfer ...

متن کامل

ANALYSIS AND OPTIMIZATION OF CONNECTING ROD USING ALFASiC COMPOSITES

Connecting rod is the intermediate link between the piston and the crank. And is responsible to transmit the push and pull from the piston pin to crank pin, thus converting the reciprocating motion of the piston to rotary motion of the crank. Generally connecting rods are manufactured using carbon steel and in recent days aluminium alloys are finding its application in connecting rod. In this w...

متن کامل

Process-based tolerance assessment of connecting rod machining process

Process tolerancing based on the process capability studies is the optimistic and pragmatic approach of determining the manufacturing process tolerances. On adopting the define–measure–analyze–improve–control approach, the process potential capability index (C p) and the process performance capability index (C pk) values of identified process characteristics of connecting rod ...

متن کامل

Finite Element Analysis of Connecting Rod

Abstract—The connecting rod transmits the piston load to the crank causing the latter to turn, thus converting the reciprocating motion of the piston into a rotary motion of the crankshaft. Connecting rods are subjected to forces generated by mass and fuel combustion. This study investigates and compares the fatigue behavior of forged steel, powder forged and ASTM a 514 steel cold quenched conn...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006