Pii: S0378-3812(01)00589-1
نویسندگان
چکیده
Boiling points have been determined at 101.33 kPa for the binary mixtures of sulfolane + o-xylene, sulfolane + m-xylene, sulfolane+p-xylene, sulfolane+ethylbenzene and sulfolane+1,2,4-trimethylbenzene. Calculations of the non-ideality of the vapor phase were made with the second virial coefficients evaluated from the Hayden–O’Connell method. The binary parameters for five activity coefficient models (Margules, van Laar, Wilson, NRTL and UNIQUAC) have been fitted with the experimental boiling points measured in this work. A comparison of model performances has been carried out using the criterion of the average absolute deviations in boiling point. The activity coefficient of the component in the liquid phase is discussed based on the UNIFAC model with the consideration of the dipole–dipole interactions. © 2001 Elsevier Science B.V. All rights reserved.
منابع مشابه
Pii: S0378-3812(01)00705-1
A methodology for multi-level conceptual design and analysis of crystallization-based separation processes involving electrolyte systems is presented. The methodology consists of three main parts: thermodynamic part (level 1), flowsheet design/analysis part (level 2) and flowsheet validation (simulation) part (level 3). In this paper, the integration of the thermodynamic and design/analysis par...
متن کاملPii: S0378-3812(01)00527-1
Liquid–solid phase equilibrium measurements were carried out at various pressures and temperatures below the onset of crystallization in a mixture made up of a distribution of paraffins with composition exponentially decreasing from n-C6 to n-C36. Liquid and solid phases in partially frozen mixtures were separated by isobaric and isothermal filtration and analyzed by gas chromatography. Waxy so...
متن کاملPii: S0378-3812(01)00650-1
We have used Monte Carlo simulation and the Gibbs–Duhem integration technique to calculate temperature– composition and pressure–temperature phase diagrams for binary Lennard–Jones mixtures. We systematically explore Lennard–Jones parameter space to demonstrate how the features of these phase diagrams change as a function of diameter ratio, well-depth ratio, binary interaction parameter, and pr...
متن کاملPii: S0378-3812(01)00448-4
An understanding of the relationship between chemical structure and lubricant performance is highly desirable from both a fundamental and a practical perspective, such knowledge being vital to improve the performance of mineral oils and to guide the design of future synthetic lubricants. The rheological properties of alkanes of intermediate molecular size (C20–C40) are of particular interest as...
متن کاملPii: S0378-3812(01)00435-6
The extended corresponding states principle has been applied on the prediction of the surface tension of pure molten alkali halides. The model uses liquid density and vapour pressure data of the salts of interest and of the reference salt, chosen to be NaCl, as the input for the calculation of temperature-dependent equivalent substance reducing ratios (ESRR). The model here described was alread...
متن کامل