Modeling and Investigation on a Jet Pipe Electrohydraulic Flow Control Servovalve
نویسندگان
چکیده
Abstract The analyzed electrohydraulic servo valve is jet pipe type, is one of the mechatronics component used for precision flow control application. It consists of several precision and delicate components. For the analysis the jet pipe assembly of servovalve is identified and conducted a direct-solution steady-state dynamic analysis to study the response of the system for harmonic excitation. The flexure tube is one of the delicate and critical components in jet pipe assembly; the analysis was sighted around the flexure tube design and material property. The assembly was subjected for analysis to ascertain the response of the system for critical parameters like thickness of flexure tube and material for flexure tube. The system resonance frequency was observed for different flexure tube thickness and for different material properties of flexure tube.
منابع مشابه
Frequency Response Of Critical Components Of A Hydraulic Servovalve
The analyzed electrohydraulic servo valve is jet pipe type, is one of the mechatronics component used for precision flow control application. The jet pipe servo valves have one movable nozzle and two collector ports, from where fluid is ducted to the main valve spool. The servovalve analyzed here is basically used in fuel control application in Variable Geometry Actuation System (VGAS) of a gas...
متن کاملInvestigations on Actuator Dynamics through Theoretical and Finite Element Approach
This paper gives a new approach for modeling the fluid-structure interaction of servovalve component-actuator. The analyzed valve is a precision flow control valve-jet pipe electrohydraulic servovalve. The positioning of an actuator depends upon the flow rate from control ports, in turn depends on the spool position. Theoretical investigation is made for No-load condition and Load condition for...
متن کاملMathematical Modeling of a Two Spool Flow Control Servovalve Using a Pressure Control Pilot
A nonlinear dynamic model for an unconventional, commercially available electrohydraulic flow control servovalve is presented. The valve is a two-stage valve and differs from the conventional servovalve in that it does not require a feedback wire and ball, and the boost stage uses two spools, instead of a single spool, to meter flow into and out of the valve separately. Consequently, the valve ...
متن کاملExperimental Investigation of Bed Variations due to Circular Culvert Jet with Different Angles
Downfall flows from different outlet hydraulic structures such as culverts and jetsthrowingtothe erodible downstream bed cause scour hole and changes in the downstream bed topography. Therefore,by performing some physical modeling tests on culvert jet flow under different angles, changes in the downstream bed topography under the effect of different parameters such as flow rate, depth of the ta...
متن کاملModeling supply and return line dynamics for an electrohydraulic actuation system.
This paper presents a model of an electrohydraulic fatigue testing system that emphasizes components upstream of the servovalve and actuator. Experiments showed that there are significant supply and return pressure fluctuations at the respective ports of the servovalve. The model presented allows prediction of these fluctuations in the time domain in a modular manner. An assessment of design ch...
متن کامل